This year at Computex, Apacer was showing off several new DDR5 memory modules and storage products. First up is its NOX RGB DDR5 CUDIMM which delivers a base speed of 8000 MT/s, but according to the company, can be overclocked to 9000 MT/s and there's also a non RGB version. Next up we have the Shield RGB DDR5 modules, which appears to want to take on Corsair's Dominator modules, at least design vise and these are also available without RGB. There was no mention of any speeds for these modules and as they'll only be available later this year, there's no information on the Apacer website either. Finally, Apacer has entered into a partnership with ASUS to produce TUF co-branded memory and was showing off the new NOX TUF RGB DDR5 modules. The already available non RGB version is available in speeds from 5200 MT/s to 6800 MT/s.

On the storage side, Apacer had a new external USB4 Gen 3x2—otherwise known as 40 Gbps—SSD, which is based on the Phison U21 controller. The AS741 as the drive is called, will be available in sizes from 1 TB to 4 TB and it should offer sequential read speeds of up to 4000 MB/s and sequential write speeds of up to 3600 MB/s. It also has an integrated cable/handle, which is the blue part in the picture, but we're not sure how it really is intended to work. Apacer also had a new PCIe 5.0 x4 M.2 NVMe SSD that goes under the name of AS2280F4U, which is based on Silicon Motion SM2508 controller and it should offer read speeds of up to 14000 MB/s and write speeds of 13000 MB/s. It will come in sizes between 1 TB and 4 TB and the heatsink has a rather tiny fan built into it. Both of the SSDs will be available later this year.