Enermax at the 2025 Computex showed us several of its latest innovations with PC and workstation cases. We begin our tour with an attraction in the Enermax booth—a fluorinated liquid immersed workstation that implements a copper foam-lattice heatsink that dissipates heat from a Ryzen Threadripper PRO 7000 processor and as many as four high-end GPUs, to the immersion fluid. Next up, is the Studio-G, a production eGPU enclosure Enermax co-designed with Sparkle. The enclosure features an 850 W ATX 3.1 power supply that can feed a graphics card with a 600 W 12V-2x6 connector or 3x 8-pin PCIe power, while the PCI-Express 4.0 x16 slot (electrical x4) puts out an additional 96 W. The enclosure features a bridge chip that converts the PCI-Express 4.0 x4 to a Thunderbolt 5 interface, which includes support for 120 Gbps host-to-GPU and 40 Gbps GPU-to-host asymmetric bandwidth boost. The demo unit was shown featuring a PowerColor RX 9070 XT Red Devil with 3x 8-pin PCIe power.

On our way to the company's main case stand, we also spotted the Enermax Open Frame system, targeting enthusiasts and overclockers. It suppors motherboards as large as E-ATX, and was demoed with a Xeon W-3595X based workstation build with an RTX 5090. The EL 501A Air and EL 600A Scenic are ATX mid-tower cases. The Scenic comes with tempered glass front panel that curves along the edges, while the Air comes with a mesh intake. The Scenic comes with up to 9 fan mounts, while the Air comes with 12. Both cases offer up to 43 cm of clearance for graphics cards, and up to 16.5 cm clearance for CPU coolers. You get a spacious crawlspace behind the motherboard tray for better cable management, and modern front-panel features such as USB 3.2 type-C. Both cases come in white and black trims.

Enermax CPU and case cooling product lineup shown at Computex 2025 is led by the Aquasoar series. The Aquasoar 360 is the company's premium AIO CLC featuring a pump-block with not one, but two displays. The larger 3.5-inch main display is along the top of the pump-block, while the smaller 2.4-inch one moves on a hinge—you can have it face the top, or the side. Each of the three 120 mm radiator fans comes in a uniquely designed fan frame, and implements daisy-chaining to reduce cable clutter.

The Aquasoar ACS 360 is a step up from the Aquasoar 360, with three exclusive features—its cold plate implements AeroCore Structure (ACS), which extends the copper cold-plate with an extruded aluminium heatsink. A 70 mm fan sits on top of this heatsink, airflow from this fan not just dissipates heat from this heatsink, but also cools the VRM area. The third exclusive feature is its 360 mm x 120 mm compound fan replacing the daisy-chained 3x 120 mm, which further reduces the cable clutter. Each impeller can push up to 82 CFM of airflow.

Enermax at the 2025 Computex showed us their latest PSU products, led by the Platimax II series, which meets ATX 3.1 and PCIe 5.1 specs, and offering 80 Plus Platinum switching efficiency. The series is led by the Platimax II 2400DF, a 2400 W PSU designed for workstations that have up to four high-end GPUs for AI inferencing. The PSU puts out four 600 W rated 12V-2x6 power connectors, and uses what looks like a dual +12 V rail design. It uses a 140 mm double ball-bearing fan to keep cool, and includes a fanless mode up to a certain load percentage.

Positioned just a notch below this is the Platimax II 1600DF, a 1600 W PSU that puts out two 600 W rated 12V-2x6 connections, and comes in the same 18 cm-long body as the 2400DF, using a 140 mm double ball-bearing fan, and including a fanless mode. Below the 2400DF and 1600DF are a trio of performance-segment variants, which include the 850DF, the 1000DF, and the 1200DF. These three come in a smaller 15 cm-long body, use 135 mm double ball-bearing fan, and each of the three puts out a single 600 W rated 12V-2x6.