A few batches of GeForce RTX 4070 graphics cards are based on the 5 nm "AD103" silicon, a significantly larger chip than the "AD104" that powers the original RTX 4070. A reader has reached out to us with a curiously named MSI RTX 4070 Ventus 3X E 12 GB OC graphics card, saying that TechPowerUp GPU-Z wasn't able to detect it correctly. When we took a closer look at their GPU-Z submission data, we found that the card was based on the larger "AD103" silicon, looking at its device ID. Interestingly, current NVIDIA drivers, such as the 552.22 WHQL used here, are able to seamlessly present the card to the user as an RTX 4070. We dug through older versions of GeForce drivers, and found that the oldest driver to support this card is 551.86, which NVIDIA released in early-March 2024.

The original GeForce RTX 4070 was created by NVIDIA by enabling 46 out of 60 streaming multiprocessors (SM), or a little over 76% of the available shaders. To create an RTX 4070 out of an "AD103," NVIDIA would have to enable 46 out of 80, or just 57% of the available shaders, and just 36 MB out of the 64 MB available on-die L2 cache. The company would also have to narrow the memory bus down to 192-bit from the available 256-bit, to drive the 12 GB of memory. The PCB footprint, pin-map, and package size of both the "AD103" and "AD104" are similar, so board partners are able to seamlessly integrate the chip with their existing AD104-based RTX 4070 board designs. End-users would probably not even notice the change until they fire up diagnostic utilities and find them surprised.

TechPowerUp today released the latest version of the popular GPU-Z graphics sub-system information, monitoring, and diagnostic utility. Version 2.59.0 adds support for new GPUs, but also fixes a few important issues with the application. To begin with, support is added for the NVIDIA RTX 2000 Ada and RTX 1000 Ada Laptop GPUs. An application launch error on Windows 7 and Windows 8 systems reading "unsigned driver cannot load" has been fixed.

The other issues resolved mainly concern the way PCI resizable BAR status is detected. On external GPUs, resizable BAR status was appearing as "enabled." This has been fixed. eGPUs lack resizable BAR support due to the limitations of USB interconnect. On notebooks with NVIDIA Optimus GPUs that support resizable BAR, the status was being reported as "disabled" when the discrete GPU is sleeping, which has been fixed. Lastly, instances where resizable BAR support is reporting as "Yes" instead of "enabled" or "disabled" has been fixed. Grab TechPowerUp GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.59.0

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the graphics sub-system information, diagnostic, and monitoring utility for enthusiasts, gamers, and engineers. Version 2.58.0 adds initial support for Intel Core Ultra "Meteor Lake" processors. Support is also added for AMD Radeon RX 7600M graphics. In the NVIDIA side of things, support is added for several exotic GPUs such as the RTX 3500 "Ada," RTX 3050 4 GB, and A500. Periodic stuttering in Counter Strike 2 and certain other games, due to GPU-Z accessing the underlying Radeon hardware has been fixed. Video BIOS version reporting is added for Intel "Alder Lake," "Raptor Lake," and "Raptor Lake Refresh" processors. Framework and Aetina notebook sub-vendor IDs have been added with this release. Support for Shader Model 6.7 and 6.8 has been added. DXVA now supports 8K resolution profile reporting. The PCIe resizable BAR reporting will correctly report status for NVIDIA "Turing" GPUs now, previously it was limited to Ampere and newer.

Data formatting of some OpenCL size values has been improved in the Advanced tab with this release. The GPU-Z installer is now digitally signed. The ROP count of Radeon RX 7900 GRE and NVIDIA A40 now correctly display. AMD "Zen 4" mobile processor memory type displaying as DDR5 when LPDDR5 memory installed, has been fixed. A rare bluescreen on some AMD GPUs has been fixed. Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z v2.58.0

Brazilian tech enthusiast Paulo Gomes, in association with Jefferson Silva, and Ygor Mota, successfully modded an EVGA GeForce RTX 2080 "Turing" graphics card to 16 GB. This was done by replacing each of its 8 Gbit GDDR6 memory chips with ones that have double the density, at 16 Gbit. Over the GPU's 256-bit wide memory bus, eight of these chips add up to 16 GB. The memory speed was unchanged at 14 Gbps reference, as were the GPU clocks.

The process of modding involves de-soldering each of the eight 8 Gbit chips, clearing out the memory pads of any shorted pins, using a GDDR6 stencil to place replacement solder balls, and then soldering the new 16 Gbit chips onto the pad under heat. Besides replacing the memory chips, a series of SMD jumpers need to be adjusted near the BIOS ROM chip, which lets the GPU correctly recognize the 16 GB memory size. The TU104 silicon by default supports higher density memory, as NVIDIA uses this chip on some of its professional graphics cards with 16 GB memory, such as the Quadro RTX 5000.

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information, monitoring, and diagnostic utility for gamers, engineers, and enthusiasts alike. Version 2.57.0 comes with support for all of the big new GPU releases this month. These include the NVIDIA GeForce RTX 4070 SUPER, RTX 4070 Ti SUPER, RTX 4080 SUPER, and RTX 4090D; and AMD Radeon RX 7600 XT. Support is also added for the Radeon 760M iGPU, the Steam Deck OLED iGPU; Tesla T4G, and A100 40 GB processors. We've also added detection for AV1 Profile 2 under the DXVA menu in the Advanced tab. The release also fixes BIOS extraction from some NVIDIA cards. Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.57.0

TechPowerUp today announced the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information and diagnostic utility for gamers, enthusiasts, and engineers alike. Version 2.56.0 adds a host of new features, usability upgrades, and support for new GPUs. To begin with, we've added the ability to list and detect DLSS 3 Frame Generation and DLSS 3.5 Ray Reconstruction in the NVIDIA DLSS section of the Advanced tab. The DLSS Scanner that detects the versions of DLSS libraries in your installed games. It now gives you the ability top open that game's folder in its context menu and select the target DLL file in File Explorer. The Sensors tab can now show the NVIDIA crossbar clock sensor, which by default is "off," and can be enabled for monitoring in the app Settings that you can find in the hamburger menu. Fixes have been added for Intel Arc video BIOS version reporting, and release dates for Arc A580.

Among the new NVIDIA GPUs supported with TechPowerUp GPU-Z 2.56.0 are NVIDIA RTX 5000 Ada, RTX 4500 Ada, new RTX 2050 Laptop GPU, L40s, and Hopper H800 PCIe AIC. Among the new AMD GPUs supported with this release are the AMD Radeon RX 7900 GRE, RX 6750 GRE, Radeon Pro W7700, and Pro V620 MxGPU. The new Intel GPUs supported include Intel Arc A570M, A530M, and GPU Flex 170. Grab the latest GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.56.0The changelog follows.

AMD's upcoming China-exclusive Radeon RX 7900 GRE (Golden Rabbit Edition) graphics card is reportedly configured with 80 compute units (CU), and not the previously thought 84, according to a leaked TechPowerUp GPU-Z screenshot. While GPU-Z 2.54.0 isn't fully aware of the RX 7900 GRE, and can get some hard-coded details (such as release dates) wrong, since it has the ability to detect "Navi 31" and the RX 7900 series, it is able to count the compute units.

The screenshot describes the RX 7900 GRE as featuring 80 CU, or 5,120 stream processors—the same count as the previous-gen RX 6900 XT, but based on the newer RDNA3 graphics architecture. Also detected are a TMU count of 320, ROP count of 80 (a vast reduction from the 192 available on the silicon, if true). We've known from older reports that the RX 7900 GRE is configured with a 256-bit wide GDDR6 memory interface, holding 16 GB of video memory. What's new is that while the RX 7900 XT and RX 7900 XTX use 20 Gbps memory, the RX 7900 GRE is given slower 18 Gbps memory, as detected by GPU-Z. This results in a memory bandwidth of 576 GB/s, a significant reduction from the 960 GB/s enjoyed by the RX 7900 XTX.

An unusual MSI RTX 3080 Ti SUPRIM X graphics card is up for sale, second hand, on Facebook Marketplace—the Sydney, Australia-based seller is advertising this component as a truly custom model with a non-standard allocation of VRAM: "Yes this is 20 GB not 12 GB." The used item is said to be in "good condition" with its product description elaborating on a bit of history: "There are some scuff marks from the previous owner, but the card works fine. It is an extremely rare collector's item, due to NVIDIA cancelling these variants a month before release. This is not an engineering sample card—this was a finished OEM product that got cancelled, unfortunately." The seller is seeking AU$1100 (~$740 USD), after a reduction from the original asking price of AU$1,300 (~$870 USD).

MSI and Gigabyte were reportedly on the verge of launching GeForce RTX 3080 Ti 20 GB variants two years ago, but NVIDIA had a change of heart (probably due to concerns about costs and production volumes) and decided to stick with a public release of the standard 12 GB GPU. Affected AIBs chose to not destroy their stock of 20 GB cards—these were instead sold to crypto miners and shady retailers. Wccftech points out that mining-oriented units have identifying marks on their I/O ports.

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information, monitoring, data-logging, and diagnostic tool for gamers, PC enthusiasts, overclockers, and engineers. The latest version 2.54.0 adds support for new graphics cards, and has several improvements that we're sure you'll find useful. Among the new NVIDIA GPUs supported are the GeForce RTX 4060, RTX 4060 Ti, RTX 3060 (based on GA104-B), RTX 3050 Laptop GPU 4 GB, RTX 3050 Mobile 6 GB (based on GA107-B), 40-2Q, L4, RTX A500 Mobile, RTX 2000 Ada Mobile, RTX 4000 SFF Ada, RTX 5000 Ada Mobile. The new AMD GPUs supported include Radeon RX 7600, Pro W7800, W7900, E8860, Ryzen Phoenix Radeon 7x0M, and Ryzen Z1 Extreme. The new Intel GPUs supported include Arc Pro A60, A60M, Flex 140, Iris Xe Max 100, additional Raptor Lake iGPU variants. Vendor support is added for Sparkle (Intel Arc board partner).

With this release, we've added the ability to monitor and log the real-time video memory read/write bandwidth usage for Intel Arc GPUs. Power monitoring for Intel Arc GPUs was broken after a recent driver update, this is fixed now. We've also improved the video codec capability detection in the DXVA section of the Advanced tab, for all GPUs. The XML Dump output file now includes GPU transistor-count and release date. The Fake GPU detection has been improved. Die-size values for NVIDIA GeForce Ada GPUs have been fixed, as is the transistor-count of RTX 4070 Mobile (based on AD106). Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.54.0The change-log follows.

AMD Radeon RX 7600 GPU-related leaks continue to trickle out as we get closer to the late May launch window, when AMD's entry-level model is predicted to take on the upcoming NVIDIA GeForce RTX 4060 graphics card. Details of Sapphire and MSI RX 7600 (non-XT) custom cards have appeared online over the past week and a half, with basic GPU specifications spotted on retail packaging. VideoCardz has received yet another tip-off and has today released a screenshot from a GPU-Z session. We cannot confirm the accuracy of the specs due to our own NDA with AMD, but we can confirm that GPU-Z since version 2.53.0 does have early support the Navi 33 GPU.

The listed details of a "Navi 33 XL GPU" correlate with leaked information from the past week or two, confirming the presence of 32 Compute Units and 2048 Stream Processors. The standard allocation of 8 GB GDDR6 memory is verified once more, complete with a 128-bit wide memory interface. VideoCardz notes that the GeForce RTX 4060 Ti is quite similar in terms of memory technicalities - with a maximum bandwidth of 288 GB/s (Gen 4 PCIe interface restricted to 8 lanes). GPU-Z states that the Navi 33 XL/RX 7600 GPU has the following core clock speeds: 1720 MHz (base), 2250 MHz (performance game mode) and 2655 MHz (boosted) - tipsters have suggested that the chip is capable of hitting a maximum threshold of 2850 MHz.

Today, we are releasing the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information and diagnostic utility. Version 2.53.0 adds support for a large number of new and rare GPUs. Among the NVIDIA GPUs support is added for include the GeForce RTX 4070, RTX 4090, RTX 4080, RTX 4060, and RTX 4050; pro-vis RTX 6000 Ada, RTX 3060 Laptop GPU (based on GA104), RTX 3050 Laptop GPU 6 GB, RTX 2050; and compute accelerators Hopper H100 PCIe AIC, and a rare engineering sample of the RTX 2080 Ti. From the AMD camp, support is added for Radeon RX 7600S, Radeon Pro W6900X, Pro V620, and the iGPU of Ryzen "Mendocino" laptop processors. From the Intel side, we've added support for Intel "Raptor Lake-HX," "Alder Lake-N," "Alder Lake-U," and the UHD P750 iGPU found with certain "Rocket Lake" processors.

DOWNLOAD: TechPowerUp GPU-Z v2.53.0

There have already been rumors that NVIDIA plans to introduce new GPU variants to some of its RTX 40 series graphics cards, namely the RTX 4070 and the RTX 4080, but now, a fresh RTX 4090 Founders Edition has been spotted with an updated AD102-301 GPU. According to the previous reports, an updated GPU was needed in order to enable a new voltage comparator circuit on the board. The same reports suggested that it could result in cheaper boards, lower build cost, and thus a lower price, but so far, there are no significant price changes for the RTX 40 series.

While there were no reports that the GeForce RTX 4090 will be on the update path, an updated GeForce RTX 4090 has been shipped to Redditor "cavityserach123." The card in question keeps the same Device PCI ID in GPU-Z, but the Sub ID has been changed, suggesting that it won't be possible to flash it with the BIOS of the previous AD102-300 based RTX 4090.

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information, diagnostic, and monitoring utility. Version 2.51.0 adds full support for the new NVIDIA GeForce RTX 4080 graphics card, including support for BIOS extraction from RTX 4090 and RTX 4080. Besides these, it supports the new RTX 3060 Ti GDDR6X variant, and RTX 3060 based on GA104. We've added the ability to monitor real-time power draw from 16-pin ATX 12VHPWR connector on graphics cards with it. Memory temperature sensors for RTX 40-series has also been added. The transistor-count of the AD102 silicon has been fixed. The DLSS Scan in the Advanced tab no longer starts automatically, and waits for you to select the drives first. It now properly indicates that a search operation has been stopped, when you click on "stop." A crash with crash in Glenfly's Advanced panel has been fixed. The Vulkan and OpenGL tabs have visual improvements. Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z v2.51.0

AMD Radeon RX 7900 XTX reference design graphics card features an innovative new real-time monitoring feature, the Fan Intake Temperature Sensors. The reference-design RX 7900 XTX cooler has the ability to report individual fan-speeds to software (which isn't new, given that each fan will independently connect to the PCB); but what's new is that each of the fans has a temperature sensor that can detect the temperature of the air as it's being drawn in, before reaching the heatsink.

The temperature measurement of the fan intake sensors should give you a fair idea of what is the ambient temperature inside your case. At this point we don't know if the feature is exclusive to the AMD reference design, or if the company has shared the know-how with its add-in board (AIB) partners to add to their custom-design products. This sensor should be accessible by AMD Software, the utilities included by AIB partners, and we will try to add ability to read from this sensor to TechPowerUp GPU-Z. The reference RX 7900 XTX cooler also features addressable RGB LEDs, first ever for a reference-design graphics card (they've had single-color lighting).

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information and diagnostics utility for PC enthusiasts and gamers. Version 2.50.0 adds support for NVIDIA GeForce RTX 4090, and improved support for Intel Arc A770, and Arc A750. Video memory chip temperature monitoring has been added for Arc "Alchemist," and the overall temperature sensors for the Arc series have been fixed. The DLSS game scanning has been improved to tell if no DLSS-compatible games have been found.

While the number "2.50" might sound special, it is not, it is simply 49+1. We also had to get this build out quickly so that reviewers can do their jobs playing with the latest hardware from Intel and NVIDIA.

Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.50.0

TechPowerUp released the latest version of TechPowerUp GPU-Z, the popular graphics information and diagnostics utility for gamers and PC enthusiasts. Version 2.49.0 adds support for the iGPU of the upcoming Ryzen 7000-series "Zen 4" desktop processors, codenamed "Raphael." CPU temperature monitoring for these processors works the same way as it does for older Ryzens, so no changes needed in that regard. The GPU model reporting for Intel Arc A750/A770 has been fixed. Support is added for the Intel Arc A580. Some rare application crashes with AMD Radeon cards have been fixed. The NVIDIA DLSS game scan we introduced with the previous version doesn't actually "use" DLSS in any way, it only scans for games supporting DLSS, so we made it available on all systems.

DOWNLOAD: TechPowerUp GPU-Z 2.49.0

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the handy graphics sub-system information, diagnostic, and monitoring utility for gamers, developers, and enthusiasts. Version 2.48.0 introduces several new features. To begin with, we've added a new DLSS section to the Advanced Tab, which has the ability to find all installed games on your machine, and report their DLSS library version. You can use this information to try and replace the library with the latest one from our collection. GPU-Z will no longer send any traffic to "www.techpowerup.com," but instead to the "www.gpu-z.com" URL, so IT administrators can easily block traffic originating from GPU-Z across a large organization. Previous endpoints on "techpowerup.com" will be disabled soon. Also, on NVIDIA's request, we have programmed GPU-Z to disable all its network activity (automatic and manual) when an Engineering Sample is detected.

Intel Arc "Alchemist" detection, sensors, specs, and reporting, have undergone numerous improvements as we've had more time to spend with these GPUs. Intel's discrete-GPU power sensor is now labeled "GPU chip power draw," to let you know that it only measures the ASIC power, and not the total board power. Vendor ID has been added for Advantech. Numerous information-related errors have been fixed. Among the new GPUs supported with this release are the NVIDIA RTX 3050 OEM, MX550 (TU117-A), RTX A5500, A5500 Mobile, A4500 Mobile, A3000 12 GB Mobile, and A1000 Embedded; and several Arc "Alchemist" SKUs. Support is also added for the legacy AMD FireStream 9170.

DOWNLOAD: TechPowerUp GPU-Z 2.48.0The change-log follows.

This is probably the only picture of a GeForce RTX 3090 SUPER Founders Edition graphics card. NVIDIA allegedly decided against this branding, in favor of the RTX 3090 Ti, to designate its maxed-out GA102-based graphics card. With no other "SUPER" SKUs in the RTX 30-series and plenty of "Ti," the company probably thought it wasn't worth the trouble to leave the odd SUPER SKU sticking out at the top. The picture surfaced on the NGA Forums, showing the card with prominent "RTX 3090 SUPER" branding etched along the top frame of the cooler. This card has the same device ID as the RTX 3090 Ti, so GPU-Z detects it as such. It also has identical specs to an RTX 3090 Ti Founders Edition.

TechPowerUp today released the latest version of TechPowerUp GPU-Z. Version 2.47.0 adds support for new GPUs and improves on several fronts. To begin with, it adds support for NVIDIA GeForce GTX 1630, RTX 3050 Laptop, MX570, A1000, A2000, A3000, and other pro-vis GPUs; on the AMD front, it can detect RX 6700 or "Radeon 6700" cards. Support is also added for Intel Core "Alder Lake-H," "Alder Lake-U," and "Alder Lake-HX" processors and their iGPUs.

TechPowerUp GPU-Z 2.47.0 comes with many improvements to the detection of Intel Arc "Alchemist" GPUs. The fake GPU detection was expanded to cover knockoffs based on NVIDIA G98, GT200, and GK104. A workaround was added to fix broken clock-speed detection for AMD GPUs with some recent driver versions this year. Non-LHR reporting of the RTX 3080 12 GB has been fixed. You now have the ability to no longer resume logging on GPU-Z restart, by unchecking a checkbox. Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.47.0The change-log follows.

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the popular graphics sub-system information, diagnostic, and monitoring utility. Version 2.46.0 introduces support for the AMD Radeon RX 6950 XT, RX 6750 XT, and RX 6650 XT. It also improves support for Intel Arc "Alchemist" GPUs. Support is added for rare graphics cards, such as the GA107-based GeForce RTX 2050, and NVIDIA A30. Support is also improved for Xe LP-based iGPUs in "Alder Lake" mobile processors, and the Glenfly GPU. The core driver of GPU-Z has been updated to no longer require an SSE2-capable CPU. AMD's 2022-series drivers are correctly labeled as "AMD Software." Resizable BAR misreading on AGP graphics cards has been fixed.

DOWNLOAD: TechPowerUp GPU-Z 2.46.0

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the graphics sub-system information and diagnostic utility. Version 2.45 introduces support for a number of new GPUs. On the NVIDIA side, we have the GeForce RTX 3090 Ti, RTX 3060 Ti (GA103-based), RTX 3080 Ti Laptop GPU, T1000 8 GB, T400, CMP 170HX, and A16. On the AMD side, we have the Radeon RX 6950 XT, RX 6750 XT, RX 6800S, RX 6700S, RX 6850M XT, RX 6650M XT, W6400, "Barcelo" APU, "Rembrandt APU," and Valve Steam Deck GPU. Preliminary support is also added for Intel Arc "Alchemist" series. Memory size reporting of NVIDIA "Ampere" was improved. Also improved is support for Intel "Alder Lake" iGPUs, support for HBM and DDR4 memory on NVIDIA, and improved "GA106" transistor count.

DOWNLOAD: TechPowerUp GPU-Z 2.45

TechPowerUp today released the latest version of TechPowerUp GPU-Z, the handy graphics sub-system information and diagnostic utility for gamers and PC enthusiasts. Version 2.44.0 adds support for several new GPUs, feature updates to the Resizable BAR detection, and a handful other fixes. To begin with, GPU-Z adds support for NVIDIA GeForce RTX 3050, RTX 3080 12 GB, RTX 3070 Ti Mobile, RTX 3050 Ti Mobile, RTX 2060 12 GB, MX550, and a number of other mobile GPUs from NVIDIA. On the AMD front, you get support for Navi 24: Radeon RX 6500 XT, RX 6400, RX 6300M, RX 6500M, PRO W6300M, PRO W6500M, and PRO W660M. Support is also added for Intel "Alder Lake" non-K processors, "Alder Lake" mobile processors, and Xeon processors based on "Rocket Lake."

TechPowerUp GPU-Z can now report the exact base-address register (BAR) size when Resizable BAR is enabled. Find it in the Advanced Panel, under Resizable BAR. Detection of Resizable BAR has been improved. Detection of LHR in certain RTX 3060 cards has been improved to weed out misreporting of LHR. Vendor detection was added for Vastarmor. The internal Screenshot hosting utility now uploads screenshots over HTTPS. The 64-bit Windows Vista name will now include a space character, so "Vista 64" instead of just "Vista64." Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.44.0

AMD announced the Radeon RX 6500 XT and RX 6400 at CES just a few days ago. These new entry-level cards debut the company's first 6 nm GPU, codenamed "Navi 24"—the smallest chip from the RDNA2 family. Navi 24 is barely the size of a motherboard chipset, roughly 100 mm² in die size. The chip only features a 64-bit wide GDDR6 memory interface, needing just two memory chips to achieve 4 GB of memory size. While AMD has been fairly quiet about it, people quickly found out that the Navi 24 GPU only uses a PCI-Express 4.0 x4 host interface. While the physical connector is x16, there is only enough signal traces for x4.Even the most updated 2.43.0 public version of GPU-Z misreports the bus interface as PCIe x16 4.0 though, which will certainly lead to confusion in the reviewer community who trust GPU-Z to report the correct specs and speeds for their articles. Maybe that's the reason why AMD has decided to not send us a sample this time—a first in 15 years.

Update Jan 20th: GPU-Z 2.44.0 has been released, which properly reports the PCIe bus configuration of RX 6500 XT.

Well, that was a short one. Just last week we released GPU-Z 2.42.0, this week we have 2.43.0, which fixes a crash on older Radeon cards, including Radeon HD 5000. After last week's release people fired up these cards in masses, to see the change from AMD to ATI logo. This new activity helped uncovered a few problems, which are fixed with this update. We also fixed a screenshot feature bug that appeared since v2.39.0 on machines with Windows XP. GPU-Z adds the ability to read power limits of NVIDIA GeForce RTX 30-series Laptop GPUs ("Ampere"), which will help you to find out exactly which Ampere Mobile SKU you have, what its power limits are, and whether you could flash its VBIOS to increase the limits. You can find these values in the "NVIDIA BIOS" section of the "Advanced" tab. The ability to report power limits for Ampere Mobile has been added to our VGA BIOS Database, too. The execution unit (EU) count of Intel Xe LP iGPUs on "Rocket Lake" processors has been fixed. Support is added for NVIDIA Quadro RTX 3000 series based on the TU106-B silicon. Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.43.0

TechPowerUp today released the latest version, 2.42.0, of TechPowerUp GPU-Z, the popular video subsystem information, diagnostic, and monitoring utility for PC enthusiasts and gamers. The latest release adds support for several new GPUs, including Intel Core "Alder Lake-S" iGPU, "Tiger Lake" server iGPU; GeForce RTX 3060 based on "GA104," RTX 3050 Ti Laptop, T1200 Mobile, GRID K340, M30, and Q12U-1. Support is also added for Radeon Pro W6800X. With this release, we're adding the ability to tell a "lite hashrate" (LHR) GPU from one that isn't. On RTX 30-series graphics cards with LHR silicon, the GPU codename field will include "(LHR)." For example, "GA102 (LHR)." Support is also added for resizable-BAR on Radeon RX 5000 series (when used with the latest drivers).

TechPowerUp GPU-Z v2.42.0 also makes it easy to collect sensor logs from your graphics hardware. Simply start it with the command-line argument "-log" followed by a filename, to log to that file. Several other issues were fixed, including application crashes when taking screenshots, a rare crash in the PCIe render test, a crash on some systems when preparing resizable-BAR support. The Radeon HD 5000 series from 2009 now displays the correct (ATI) logo. EVGA iCX sensors readings are more accurate. Radeon RX 6000 series (RDNA2) GPUs now correctly show DirectX 12_2 feature-level compatibility. Grab GPU-Z from the link below.

DOWNLOAD: TechPowerUp GPU-Z 2.42.0