Monday, January 19th 2026

UK-based Wholesaler Lists 12-core Intel Core 9 "Bartlett Lake-S" OEM SKUs

Late last week, a not-yet-released Intel "Core 7 253PE" processor model leaked out via the PassMark CPU benchmark database. This ten P-Core (all performance) candidate signalled the first signs of "Bartlett Lake-S" activity in 2026, after many months of silence. Over the past weekend, additional "Team Blue Refreshed" product discoveries have been made. On Saturday (January 17) Vectral555 highlighted three new SKUs, but did not reveal the actual source of these leaks. Screenshots show model names, codes, and very basic specifications—evidently, these grabs were lifted from premature listings published by Mouser Electronics UK. The three unreleased OEM/tray products are categorized as Core 9 SKUs, all featuring 36 MB of cache, and destined for deployment on Team Blue's "FC-LGA16A" platform—this unusual socket name seems to be another way to refer back to the familiar LGA 1700 insert.

The "273PQE" model is boost clocked the highest at a maximum 5.9 GHz, the "273PE" SKU is specced at a max. 5.7 GHz, and the "273PTE" option makes do with 5.5 GHz. At the time of writing, the British wholesaler is offering both single unit and bulk orders. The fanciest "Core 9 273PQE" model is "on order" with zero units in stock, but tagged with £657.04 (single order) and £579.17 (bulk order, ten or more units) prices. The other options—"273PTE" and "273PE"—seem to be "non-stocked," and cost the same: £629.00 (single) or £554.46 (bulk). Intel could be prepping "Bartlett Lake-S" processors—under "Core Series 2" naming convention—for imminent launch. Two days ago, ITHome shared an impressively comprehensive list of Core 5, 7, and 9 model names plus basic spec credentials.
Sources: Tom's Hardware, Vectral555 Tweet, Fudzilla, Wccftech, TweakTown, Mouser Electronics Listing, ITHome
Add your own comment

18 Comments on UK-based Wholesaler Lists 12-core Intel Core 9 "Bartlett Lake-S" OEM SKUs

#1
Dr. Dro
Come on Intel. Just release it already. Last chance to sell me one.
Posted on Reply
#2
N/A
Isn't BIOS support required to make this OEM embedded processor work in a consumer motherboard? Even then impossible to find, or justify the cost. Only for DDR4 build. PL1 unlocked?
Posted on Reply
#3
Dr. Dro
N/AIsn't BIOS support required to make this OEM embedded processor work in a consumer motherboard? Even then impossible to find, or justify the cost. Only for DDR4 build. PL1 unlocked?
The 8+16 parts and subvariants should largely work, because they're just rebranded Raptor Lake parts with the same CPUID. The new 12+0 ones might require a microcode update.
Posted on Reply
#4
Outback Bronze
Dr. DroCome on Intel. Just release it already. Last chance to sell me one.
Yeah, looking forward to seeing how these things perform.
Posted on Reply
#5
kondamin
I wonder if they will work or just burnout like the other top end raptor lakes.

Shame it took so long for them to come to market,
Posted on Reply
#6
N/A
Dr. DroThe 8+16 parts and subvariants should largely work, because they're just rebranded Raptor Lake parts with the same CPUID. The new 12+0 ones might require a microcode update.
Or it could be like the mutants that seemingly just work out of the box, so one shouldn't solely rely on the CPU support page of motherboard to get confirmation.
kondaminI wonder if they will work or just burnout like the other top end raptor lakes.

Shame it took so long for them to come to market,
It's the embedded market though. have you seen any meteor lake CPUs of the first core generation. Of course It's the bug fixed stepping
Posted on Reply
#7
twin_savage
kondaminI wonder if they will work or just burnout like the other top end raptor lakes.
Without any e cores there is no reason there should be problems. I'm still on an H0 die because I don't want e-cores on my CPU.
Posted on Reply
#8
Dr. Dro
twin_savageWithout any e cores there is no reason there should be problems. I'm still on an H0 die because I don't want e-cores on my CPU.
I mean, you could just buy a i7-13700K and just disable the E-core clusters. The extra cache and much improved clock speeds would really help. Then again, these might release soon.
kondaminI wonder if they will work or just burnout like the other top end raptor lakes.

Shame it took so long for them to come to market,
This has become a tired argument bordering on bad faith at this point. They will work as any other Raptor Lake CPU does. There are no hardware design faults in these CPUs, there was a microcode bug applying more voltage and current than intended, and a separate problem involving a manufacturing issue in a few very early units coming from one specific fab that resulted in silicon oxidation. Given the raw volume of CPUs using this architecture that Intel sold, you'd have heard a lot more if these were truly problematic.
Outback BronzeYeah, looking forward to seeing how these things perform.
Mmmm, all I know is that it will be tasty as long as they sustain a good all-core speed. Would be happy with 5.8 on all cores, maybe with some luck a nice round 6... :rockout:
Posted on Reply
#9
twin_savage
Dr. DroI mean, you could just buy a i7-13700K and just disable the E-core clusters. The extra cache and much improved clock speeds would really help. Then again, these might release soon.
Supposedly the issue Intel had with Raptor Lake CPUs frying themselves was largely because of how the e-core's bus tied into the system, so presumably a stepping with no e-cores would be more robust and less complex to validate.
Dr. DroThis has become a tired argument bordering on bad faith at this point. They will work as any other Raptor Lake CPU does. There are no hardware design faults in these CPUs, there was a microcode bug applying more voltage and current than intended
I can't agree with this enough; even during the height of the Raptor Lake scare I was still seeing a decent amount more Zen3/4/5 AMD CPU failures than Intel 12/13/14th.
Posted on Reply
#10
Dr. Dro
twin_savageSupposedly the issue Intel had with Raptor Lake CPUs frying themselves was largely because of how the e-core's bus tied into the system, so presumably a stepping with no e-cores would be more robust and less complex to validate.


I can't agree with this enough; even during the height of the Raptor Lake scare I was still seeing a decent amount more Zen3/4/5 AMD CPU failures than Intel 12/13/14th.
The root cause was a problem in the part of the microcode that handled the voltage curve. Most CPUs that malfunctioned were i9's because they support eTVB and were the most susceptible to it. Running my 13900KS for 3 years now and it's been fine throughout that ordeal, too.
Posted on Reply
#11
usiname
The wet dream for all intel fanboys is so close, the hypocrites who so eagerly defended the honor of the e cores and described how better they are finally can throw their 8+16 cores in the bin to take 12p cores CPU :roll:
Posted on Reply
#12
Dr. Dro
usinameThe wet dream for all intel fanboys is so close, the hypocrites who so eagerly defended the honor of the e cores and described how better they are finally can throw their 8+16 cores in the bin to take 12p cores CPU :roll:
It's the wet dream of anyone right now, more than 8 cores in a single core complex, or in this case, the same ring bus. AMD will push for this with Zen 6, you know. And you will praise them for it. I don't think anyone ever denied that this 12P chip will have lower MT performance than a 8P+16E model.
Posted on Reply
#13
kondamin
Dr. DroThis has become a tired argument bordering on bad faith at this point. They will work as any other Raptor Lake CPU does. There are no hardware design faults in these CPUs, there was a microcode bug applying more voltage and current than intended, and a separate problem involving a manufacturing issue in a few very early units coming from one specific fab that resulted in silicon oxidation. Given the raw volume of CPUs using this architecture that Intel sold, you'd have heard a lot more if these were truly problematic.
Sigh, next time I’m just going with my gut instinct and not caving to what tech press is pushing anymore
Posted on Reply
#14
jaszy
This one has the 4 e-core clusters (4x4) replaced w/ actual p-cores, so die density isn't too much different in size, but they'll prob have to lock down ICCMAX to a set value sub 400A. Sorta doubt a K version will exist.
Posted on Reply
#15
razzaQ
twin_savageSupposedly the issue Intel had with Raptor Lake CPUs frying themselves was largely because of how the e-core's bus tied into the system, so presumably a stepping with no e-cores would be more robust and less complex to validate.


I can't agree with this enough; even during the height of the Raptor Lake scare I was still seeing a decent amount more Zen3/4/5 AMD CPU failures than Intel 12/13/14th.
And yet that is not true at all.
Posted on Reply
#16
twin_savage
razzaQAnd yet that is not true at all.
I think that piece of "information" is from MLID so some scrutiny is warranted, however I haven't heard of a convincing alternative theory.

ucode is how the issue was solved, but there isn't a reason for ucode to just go bad between generations that were so similar with the exception of the e-core complexes; you could point to L2 cache increases also being a fairly major change between generations but the p-core only versions of this 2MB L2 arch never had the problem.
Posted on Reply
#17
Wolverine2349
Dr. DroIt's the wet dream of anyone right now, more than 8 cores in a single core complex, or in this case, the same ring bus. AMD will push for this with Zen 6, you know. And you will praise them for it. I don't think anyone ever denied that this 12P chip will have lower MT performance than a 8P+16E model.
Yes this.

More than 8 homogenous strong cores with modern IPC and platform on a single core complex in this case ring bus. No scheudling quirks of dual CCD nor e-cores and best set and forget solution for all apps and games released last 15 years.

I have waited so long for that.

Last such CPU we had was Intel 10th Gen Comet Lake but that not only has outdated IPC on Skylake duratives it is stuck at PCIe Gen 3 (Yes Gen 3 not even at 4) and DDR4 uh. Zen 3 beats it mostly and even Zen 3 is getting a bit dated.

But really needs to be unlocked and use good stable XMP RAM at 7000+ so needs unlocked SA ring and multiplier.

Will it who knows.

If this comes even partially unlocked and can work on consumer boards especially the MSI Z690 Unify X which is most stable 13th and 14th Gen RAM XMP/overlocking DDR5 board in my experience this is a true winner and future proof set and forget solution with modern IPC and modern video cards for many years to come.

Maybe Zen 6 IPC blasts it out but rumor has it Zen 6 is gonna add more cores to CCD aka 12 just like Bartlett Lake and IPC gains minimal. Seems both Intel and AMD struggling to get much more IPC gains since Intel Golden Cove and AMD Zen 3.
Posted on Reply
#18
Wolverine2349
Dr. DroCome on Intel. Just release it already. Last chance to sell me one.
This. They should have released this 3 years ago. Its not a bit too late or almost. I want one of these and 7200 DDR5 2 X 24GB XMP RAM and it will be my system for years future proof for gaming and set and forget no process Lasso no dual CCD nor big.Little stuff.

And modern IPC and platform of Raptor Cove and PCIe 5 platform. The dream of their finally being modern IPC homogenous cores on a single die is here but Intel gonna intentionally lock consumers out of it. Just awful.
Posted on Reply
Add your own comment
Nov 17th, 2026 14:40 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts