Thursday, January 29th 2026

Modder Puts vBIOS From ASUS ROG Matrix RTX 5090 With +200 W Extra Power Onto Astral RTX 5090

Flashing alternative vBIOS versions onto GPUs is a common practice used by modders to increase power limits on GPUs, and it has only become more common since NVIDIA started clamping down on overclocking options available to users via software tools. The recently announced ASUS ROG Matrix Platinum has become an attractive source for one such high-wattage vBIOS, although it has proven difficult to get the aforementioned vBIOS onto certain cards. One user on the HardwareLuxx forum, however, has managed to get the 800 W vBIOS from the Matrix Platinum GPU onto an ASUS ROG Astral GeForce RTX 5090 (read our review of the latter here), although the mod only seems to be necessary on the black version of the card.

It turns out that in order to flash the Matrix vBIOS onto the black Astral 5090 required physical modifications to the GPU PCB itself—this is due to the rear-mounted fan being wired with the front middle fan on that particular version of the card, as opposed to on a separate header as it is on the white version. The modification in question involves swapping a pull-down resistor in the serial in signal line of the EEPROM to a pull-up resistor. Obviously, this mod alone requires more than a little bit of soldering experience, but there's also the question of cooling. The stock version of the ROG Astral is designed with a 600 W power limit, and the Matrix vBIOS lifts that to 800 W, so realistically, any overclocking attempts made with the modded card requires an aftermarket cooling solution to handle the increased power and corresponding heat.
Source: HardwareLuxx
Add your own comment

41 Comments on Modder Puts vBIOS From ASUS ROG Matrix RTX 5090 With +200 W Extra Power Onto Astral RTX 5090

#2
Tomgang
Well its stupid to do any way. Why? Risk of meltet power connector for one thing and Astral is not designet to handle 800 watts.

So you clearly risk end up with a damage card. Short burt with 800 watt maybe be fine. But long running Gaming session is a clear risk.
Posted on Reply
#3
darksf
To be honest I don't understand overclocking this days. All the hustle for 10% practical uplift that you won't sense in anyway. Overclocking is dead , long gone are the days taking a 1400MHz Athlon and boosting it to 2200 or 2300MHz and then feel an actual performance boost and leaving it like this for the next 5 years. Overclocking was born out of the need to save money buy some cheap stuff and push it harder. This days the overclockable stuff is the most crazy expensive one killing all the sense of doing it if not except to show off.
Posted on Reply
#4
turbogear
Cpt.JankFlashing alternative vBIOS versions onto GPUs is a common practice used by modders to increase power limits on GPUs, and it has only become more common since NVIDIA started clamping down on overclocking options available to users via software tools. The recently announced ASUS ROG Matrix Platinum has become an attractive source for one such high-wattage vBIOS, although it has proven difficult to get the aforementioned vBIOS onto certain cards. One user on the HardwareLuxx forum, however, has managed to get the 800 W vBIOS from the Matrix Platinum GPU onto an ASUS ROG Astral GeForce RTX 5090 (read our review of the latter here), although the mod only seems to be necessary on the black version of the card.

It turns out that in order to flash the Matrix vBIOS onto the black Astral 5090 required physical modifications to the GPU PCB itself—this is due to the rear-mounted fan being wired with the front middle fan on that particular version of the card, as opposed to on a separate header as it is on the white version. The modification in question involves swapping a pull-down resistor in the serial in signal line of the EEPROM to a pull-up resistor. Obviously, this mod alone requires more than a little bit of soldering experience, but there's also the question of cooling. The stock version of the ROG Astral is designed with a 600 W power limit, and the Matrix vBIOS lifts that to 800 W, so realistically, any overclocking attempts made with the modded card requires an aftermarket cooling solution to handle the increased power and corresponding heat.
Wow even TPU is reporting about mode which was posted by me at Hardwareluxx.😀
Posted on Reply
#5
azrael
Just because you can doesn't mean you should.

Sometimes it seems as if these "modders" have money to burn.
Posted on Reply
#6
dgianstefani
TPU Proofreader
Astral has sensors on the connector with alerts, as long as it's kept cool I don't see the problem from a safety standpoint. For performance it's not gonna do more than 5% but might help a bit more on the rare occasions a 5090 is actually power limited, or with sub ambient cooling.

For those who don't own one, the 5090 doesn't sit at 600 W, typical gaming load is around 450-500, but depending on the scene it can bump against that 600 W.
Posted on Reply
#7
Scrizz
darksfTo be honest I don't understand overclocking this days. All the hustle for 10% practical uplift that you won't sense in anyway. Overclocking is dead , long gone are the days taking a 1400MHz Athlon and boosting it to 2200 or 2300MHz and then feel an actual performance boost and leaving it like this for the next 5 years. Overclocking was born out of the need to save money buy some cheap stuff and push it harder. This days the overclockable stuff is the most crazy expensive one killing all the sense of doing it if not except to show off.
Exactly! I still have a Core 2 Quad Q6600 running at 3.6Ghz 24/7 from 2.4GHz stock.
Nowadays, the chips are already pushed to the max and OC themselves. There is no point in overclocking in this era other than some benchmarks.
Posted on Reply
#8
turbogear
azraelJust because you can doesn't mean you should.

Sometimes it seems as if these "modders" have money to burn.
It is in not for everybody. I wouldn't recommend it to anybody without custom cooling.:D
To be honest, I don't need Matrix bios on Astral for gaming.
If you are into 3Dmark and chasing the scores then this helps. :rolleyes:
My card is already shunt moded so ASUS warranty is already gone.
Posted on Reply
#9
TheFlow
azraelJust because you can doesn't mean you should.

Sometimes it seems as if these "modders" have money to burn.
And sometimes it is just about figuring out what is possible. It does not allways have to make sense :D
Posted on Reply
#10
turbogear
dgianstefaniAstral has sensors on the connector with alerts, as long as it's kept cool I don't see the problem from a safety standpoint. For performance it's not gonna do more than 5% but might help a bit more on the rare occasions a 5090 is actually power limited, or with sub ambient cooling.

For those who don't own one, the 5090 doesn't sit at 600 W, typical gaming load is around 450-500, but depending on the scene it can bump against that 600 W.
Well I did this mode in order to bench with the card.
I think 800W bios is overkill for gaming. Maybe rarely needed.🤣
I own both Astral black and white and has been comparing them for two months.

My Astral black sample has a better binned chip and that was the motivation driving to see why Matrix bios works on my Astral White and not on Astral Black.

Regarding the cooling of the connector, I have some heatsinks mounted on PCB. These fit perfectly under the Alphacool block.
The block is open on the back. I have 2200rpm high CFM radiator fan blowing air at full speed at this location when I am benching.
This is the area behind connector that get quite hot as measured by my Thermal camera. Blowing air here when card is pulling over 1000W during benching helps to keep connector at cool temperatures.😄

By the way, if you look at Thermal Grizzly Deltamate, you will see that this block cools this exact area with water.


azraelJust because you can doesn't mean you should.

Sometimes it seems as if these "modders" have money to burn.
We are crazy people driven by a hobby. :laugh:
Posted on Reply
#11
Solaris17
Super Dainty Moderator
Mmm I have a white astral on the Miku rig. I’ll give this a go
Posted on Reply
#12
turbogear
Solaris17Mmm I have a white astral on the Miku rig. I’ll give this a go
You don‘t need this mode on White Astral.
That card works with Matrix bios. You can just flash it directly.😁

You will find Matrix bios and NVFlash here in TPU download sections.
Posted on Reply
#13
Dr. Dro
It works on the Palit GameRock as well. I've flashed it on mine for one run a few months ago. No balls to put 800 W through it though lol, I just benched it once at 600 W. It's still faster than Palit's BIOS, averaging just north of 3000MHz

Posted on Reply
#14
Solaris17
Super Dainty Moderator
turbogearYou don‘t need this mode on White Astral.
That card works with Matrix bios. You can just flash it directly.😁

You will find Matrix bios and NVFlash here in TPU download sections.
I already know I don’t. I didn’t know the bios worked though
Posted on Reply
#15
turbogear
Solaris17I already know I don’t. I didn’t know the bios worked though
I have been using it since December on my Astral White and no issues.
Though 800W wasn‘t enough for me. :laugh:
The card is shut modded and with EVC2 attached and all my current results in all 3DMark are with Astral White.
Let‘s see now. :rockout:
Hopefully my Black pushes my White down some positions as it has better bin. :rolleyes:
Posted on Reply
#16
Dr. Dro
Should be a matter of just doing nvflash64 -6, no hardware mods are required to just flash it.

Quiet (600W)
www.techpowerup.com/vgabios/280844/asus-rtx5090-32768-251013-1
Performance (800W)
www.techpowerup.com/vgabios/280329/asus-rtx5090-32768-251013
turbogearI have been using it since December on my Astral White and no issues.
Though 800W wasn‘t enough for me. :laugh:
The card is shut modded and all my current results in all 3DMark are with Astral White.
Let‘s see now. :rockout:
Hopefully my Black pushes my White down some positions as it has better bin. :rolleyes:
How's your average clocks? Mine averaged 3007MHz almost flatlined on Time Spy and most other non RT workloads, limited to 600 of course. The Palit BIOS does around 2880-2940. Matrix BIOS is really optimized. Time to brag and post benchies :)
Posted on Reply
#17
Solaris17
Super Dainty Moderator
Dr. DroShould be a matter of just doing nvflash64 -6, no hardware mods are required to just flash it.
I know. These are already 600w so I’d only be doing the 800w.

I know all about cross flashing, my interest was this specific astral.

My other LC 5090 sees crazier things.
Posted on Reply
#18
turbogear
Dr. DroShould be a matter of just doing nvflash64 -6, no hardware mods are required to just flash it.

Quiet (600W)
www.techpowerup.com/vgabios/280844/asus-rtx5090-32768-251013-1
Performance (800W)
www.techpowerup.com/vgabios/280329/asus-rtx5090-32768-251013



How's your average clocks? Mine averaged 3007MHz almost flatlined on Time Spy and most other non RT workloads, limited to 600 of course. The Palit BIOS does around 2880-2940. Matrix BIOS is really optimized. Time to brag and post benchies :)
For the Astral Black with Matrix bios, I still need to test it thoroughly on weekend to see how it performs with the bios.

I just found the solution on Wednesday and didn't get afterwards time to really run it through benchmarks expect for basic tests.

The White hits 3400MHz on different 3Dmark benchmark but pulling like 1200W in some situations on my shunt mode plus EVC2. :laugh:

I don't play any games on the Astral Black and Astral White. They are for my bench rig.
For gaming a Gigabyte 5080 is enough for me. :p
Posted on Reply
#19
Inferna
turbogearFor gaming a Gigabyte 5080 is enough for me. :p
As someone used to open, modify and bench cards, what do you think about the build quality of your Gigabyte GPU ?
I despise this brand (I do own a Gigabyte 3080 tho, can't be picky when there is a global crisis) curious about what a modder think about it.
Posted on Reply
#20
turbogear
@Inferna

The build quality is okay, but I like Astral cards better because of their monitoring features.
Lot of people have the bigger brother 5090 from Gigabyte because Gigabyte had often a good bin on those especially on the Master ICE 5090.

I didn't do any benchmarking on the 5080 at the moment, as I was busy with the 5090, but it looks like it has potential.😀

What I don't like about my Gigabyte Aorus Master 5080 is the putty applied everywhere.

I am not a fan of that.




This is how it looked when I opened it.
Putty makes a lot of mess. 😅
GPU covered with mix of Liquid metal and paste.

It would have been better to use liquid metal directly than a mix.



I cleaned it and put it on waterblock. I don't have further pictures with the block.




At some point, I will also shunt mode it and attach EVC2 and run some benchmarks.😆
Posted on Reply
#21
Inferna
Thanks for the reply it does looks messy !
I thought mixing thermal paste and liquid metal totally defeat the benefits of the second one, that's weird.
Posted on Reply
#22
turbogear
InfernaThanks for the reply it does looks messy !
I thought mixing thermal paste and liquid metal totally defeat the benefits of the second one, that's weird.
Yes weird decision from Gigabyte.
If they want the real deal than go directly with LM.
Any case when you have a mix, you still have to do the same protection from shorting the other component like when you have real LM.

Der8auer did ones a video about it that it's a bit better for temperatures than normal thermal paste but you still can't compete with real LM.

By the way look at their protection from leakage of this conductive paste onto other parts of PCB.
They did it with building a wall from normal thermal past around the GPU chip. 🤣
It really looks messy.😂
Posted on Reply
#23
Cheeseball
Not a Potato
Solaris17Mmm I have a white astral on the Miku rig. I’ll give this a go
<OFFTOPIC>

You didn't buy the RTX 5080 Miku when it was out the last two months? (Albeit that shit was $1800 alone) Or did you specifically want a 5090?

I was planning to get it myself, but a RTX 5080 would be useless to me.
Posted on Reply
#24
Solaris17
Super Dainty Moderator
Cheeseball<OFFTOPIC>

You didn't buy the RTX 5080 Miku when it was out the last two months? (Albeit that shit was $1800 alone) Or did you specifically want a 5090?

I was planning to get it myself, but a RTX 5080 would be useless to me.
Wanted a 5090 and the ROG colors are worse imo. Certainly not something that would match the TUF parts
Posted on Reply
#25
Cheeseball
Not a Potato
Solaris17Wanted a 5090 and the ROG colors are worse imo. Certainly not something that would match the TUF parts
If they made a RTX 5090 MIKU (which they should've have, but alas) I would've wasted money yet again:



I would've probably sold my RTX 5090 FE and RX 9070 XT for it. :laugh:
Posted on Reply
Add your own comment
Nov 16th, 2026 01:31 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts