Friday, May 1st 2026
Noctua Explains Why chromax.black Fan Releases Take So Long
Austrian fan maker Noctua has published a technical blog explaining why it sometimes takes a long time for the company to release the dark-edition chromax.black fans after the initial beige and brown design is out. The company compares the level of engineering required for a new color code to painting a Formula 1 car, rather than a simple color change like you would typically do with a wooden fence. Noctua is known for its scientific testing, rigorous performance evaluations, highly detailed lab experiments, and more, which make its fans worthwhile. This has created a massive fan base within the enthusiast community over the years, who now eagerly await each new product release. When it comes to manufacturing, the company applies that same rigor everywhere, and a simple color change is not taken lightly. For example, Noctua produces its fans using injection molding, where plastic is melted and forced into a steel mold. However, when a new pigment is used, the entire calculation can be disrupted.
Noctua designs its fans with high precision to maximize airflow performance. This means that blade impellers have a tip clearance before hitting the fan frame of only a few tenths of a millimeter, about 0.5 mm for 120 mm fans and about 0.7 mm for 140 mm fans. Introducing any third-party pigment into this process could disrupt the structure of this fan tip clearance and potentially interfere with Noctua's Sterrox liquid-crystal polymer (LCP) material used in its fans. Specifically, color pigments have particles that directly affect how the injection mold behaves, as they carry their own particle imperfections. This negatively impacts the hundreds of thousands of performance tests that Noctua conducts in the lab and significantly delays the chromax.black product launch.For example, Noctua is now preparing to launch the chromax.black version of its NF-A12x25 G2 fan about 10 months after the initial version. However, readers may recall that it took Noctua three years after the first-generation NF-A12x25 launch, as the company was dealing with the challenges of pandemic-induced material shortages and logistical nightmares. These days, the situation is much better, but the engineering challenges remain.
Source:
Noctua
Noctua designs its fans with high precision to maximize airflow performance. This means that blade impellers have a tip clearance before hitting the fan frame of only a few tenths of a millimeter, about 0.5 mm for 120 mm fans and about 0.7 mm for 140 mm fans. Introducing any third-party pigment into this process could disrupt the structure of this fan tip clearance and potentially interfere with Noctua's Sterrox liquid-crystal polymer (LCP) material used in its fans. Specifically, color pigments have particles that directly affect how the injection mold behaves, as they carry their own particle imperfections. This negatively impacts the hundreds of thousands of performance tests that Noctua conducts in the lab and significantly delays the chromax.black product launch.For example, Noctua is now preparing to launch the chromax.black version of its NF-A12x25 G2 fan about 10 months after the initial version. However, readers may recall that it took Noctua three years after the first-generation NF-A12x25 launch, as the company was dealing with the challenges of pandemic-induced material shortages and logistical nightmares. These days, the situation is much better, but the engineering challenges remain.



73 Comments on Noctua Explains Why chromax.black Fan Releases Take So Long
Let me know when they come in red. Say 17 years, maybe?
Essentially Sun Tzu comes to mind know yourself and know your enemy find victory in 100 battles. Noctua knows the designs at this point they know what works what to look for. They also have been using LCP and other materials for YEARS with that should come an increase in knowledge of how the material reacts with different pigments especially when there two go to options are tan and brown and black. thats 3 colors...... Your telling me with 3 colors and decades of experience the process to find that sweet spot has no improved? That is legit the opposite of nearly every other industry / product design / etc.
Thermalright and Scythe both have fairly competitive GT-like options for half the cost, and at times, 1/3rd the cost (a mere 10-11 USD prior to the tariffs in the US at least; now averaging 15-16 USD). Even Arctic got on the GT-train with their P12 Pro that retails for about 9-10 USD, but doesn't use LCP for its blades like the others.
On the premium end, BeQuiet's SL4 Pro is extremely competitive in noise to static pressure performance, and for a bit more, the thicker 30mm+ fans like the Phanteks T30 or the Hyte THICC (which are currently OoS) do a bit better at certain settings.
About the only novel element from Noctua is the in-built RPM offset their 2 packs have, which help reduce noise resonance when used either as push-pull or side-by side.
Of course, if one really wanted serious cooling performance, they'd just buy a used or like new 120mm server-grade fan (120x38mm) and run it at the lowest setting; they can run fairly quiet yet push out far more air or higher pressure than the regular consumer level fans.
Currently using Be Quiet! Silent Wings 3 Pro's that are essentially completely silent at 0-1,200rpm. And yes, it was worth paying the price for a quality engineered fans that have 0 issues.
P12 Rev.4 works really quiet in 400-1150rpm range for me PC Case up to 1000rpm and CPU up to 1150rpm (If you are not noise freak up to 1500rpm should be completely fine)
P14 Rev.4 works really quiet in 400-860rpm range (without proper rubber isolation) one day will try with rubber isolation most likely it will be quieter and usable rpms should increase.
In pc case i have four different fans P12, P14, Sharkoon Rebel P20 and XFX SWIFT RX 9070 XT fans.
The most anoying fans are from XFX gpu (sound signature is not as pleasant) P14 are better but not as good as P12. I can not hear psu fan at full load or idle (very low rpms at full load).
👊🌹👍
I dumped their PWM CO version for classic PWM non-CO (I hate that sound dual ball bearings make even at low speed). Classic FDB is way to go for me.
I don't need 300k+ hours of MTBF of dual-ball bearings, I am ultimately satisfied with 150k hours of MTBF that FDB offers.
(Given that I now play 6-7 hours a week, that FDB fans will outlive me lol.)
I've tried Noctua fans, be quiet fans and I ended up with Arctic. They work, they are way much cheaper, the difference is often negligible.
IMHO, it's better to avoid expensive fans and rather put that money into better CPU/GPU/PSU/case instead. 6x 120 mm Noctua fans is 150 € ...
Expensive fans are expensive because the design work put in to making them quiet(vibration, dba & frequency) and perform well(cfm, static pressure).
havent measured it, but let say coming into the game room, his system sounded like a rig without a fan profile (e.g. running at full speed), while mine was noticeable, but more like a quiet air cleaner/fan on medium (speed).
with tinitus there is limited time i can stand certain volume levels of noise, and i basically cant handle more than 20-30 min of him playing, while i can do +12h (never tried longer), playing the same game/settings/load (R6 Siege) on mine.
@JustBenching
mounted to the top?
not surprised, and part why i dont set them up that way, always used cases where there is side/back mount option for rad/aio, and keep top for case flow.
@EatingDirt
you are comparing old fans that arent even made anymore.
the P/F xxx PRO are much better, thicker/stiffer frame, rubber pads, and no resonance range like some previous gens had.\
so yes, the new models are great fans, and given specs/identical warranty vs Noctua, are ~10% worse, while costing 1/3, so even if i look at +10y and arctic wont replace them after warranty runs out,
i can still buy 3 more sets before i paid the same as for a Noctua set.
my current case as example can mount 9/11 fans, 250-300$ for Noctuas, or 120$ max for Arctics, would have meant another ~150$ to go towards bigger cpu/gpu.
and yes, i have used Noctuas, but dont see the value vs what others offer (at that price point), and will buy some eLoops, and pay for features that really make a difference (blade material that doesnt collect dust), and even german TUV certified.
You don't even have to put the owl's stuff into the computer, it's enough to grab them by hand to realize, that the difference in the quality of the materials and engineering is night and day compared to Arctics. They are not even in the same ballpark, lol. And what 500-600% price increase? More like 250-400 depending on the exact models, which is totally worth it imo.
I'm not even shitting on Arctic, but it's a different (much lower) tier. Good for price/performance ratio, but that doesn't satisfy everybody's needs – or ears.
P12 PWM PST usually was around ~ 6€, Noctua NF-A12x25 ~ 31€, Noctua NF-A12x25 G2 ~ 35€. ~5.5x difference in cost. Noctua NF-F12 ~ 24€ but acoustically speaking it's straight up worse fan than P12 PWM PST for 4x more cost. :kookoo:
P14 PWM PST usually was around ~ 6€, Noctua NF-A14x25 G2 ~ 37€. ~6.16x difference in cost.
Now Original Arctic P12/14 fans is no more in production unfortunately they were a better fans than Max version and seems to be in some cases they are better than Pro version for example for PC cases.
Yeah, Noctua easily worth the 6 times difference. Easily. Well, if you have sensitive ears/low tolerance for unnecessary sounds in your workspace, and you want to use them for years and years. Those 6-10 EUR Arctics cost what they precisely worth, lol. For budget builds, they are ok, but not for a computer I use 10-14 hours a day, every day of the week, every month of the year.
Two of my Arctics WAS a P12 PWM PST (the third one was a P14 PWM), and it wasn't a long relationship. It's literally junk compared to even the Redux series (don't know about F, but it's certainly the case compared to the A and S series), not the mention the standard beige/brown product line, especially the top SKUs, like the NF-A12x25 G2. The accessories included in the box (heck, maybe even the box itself...) worth more, than that Arctic, lol.
Clearly none of the above. Not to mention that you compared the prices of the cheapest EOL Arctics to the absolute current top of the line Noctuas, which is a ridiculous proposition in itself. Your overblown price multiplier – which you base your argument on – starts to crumble, when you try to compare Arctic Max/Pro stuff to A/S series Redux or non-G2 beige Noctuas.
Keep up the good coping. :peace: