Monday, September 22nd 2025

FSR 4 on Older Radeon GPUs Tested: Improves Image Quality With Minor Performance Hit

After AMD recently leaked its own FSR 4 libraries on its GPUOpen GitHub repo, replete with libraries that support older hardware, it was only a matter of time before enterprising modders started demonstrating how those libraries could be used to port FSR to older RDNA GPUs. An enterprising Reddit user and modder recently posted a how-to guide explaining how to get FSR 4 implemented in games on RDNA 2 GPUs, and the results reveal improved image quality at the cost of performance. There are other caveats, as well, like having to use a very outdated driver or dive deep into configuration files to rename DLL files to get the upscaler working.

According to both the results posted in the Reddit thread and testing done by Computerbase, FSR 4 seems to offer a balance between native image quality and FSR 3.1 performance on both RDNA 3 and RDNA 2 hardware. Computerbase tested Cyberpunk 2077 in 4K on the Ultra settings preset using the AMD Radeon RX 7900 XTX, and FSR 4 delivered 11% faster performance than native, but fell short of FSR 3.1 frame rates by 16%. The Reddit user who posted the how-to guide tested an AMD RX6950 XT across a range of FSR 4 quality presets, and found that even when set to "Quality," the RDNA 2 GPU gained around 10% performance compared to native rendering in The Last of Us Part 2 at 1440p. Both sources comment that the image quality is a noticeable improvement over FSR 3, and it was more stable than XeSS, which, to its credit, beat out FSR 4 on RDNA 2 in The Last of Us Part 2 by up to 10%, depending on the quality preset. Curiously, similar performance deltas were observed when comparing the unofficial INT8 FSR 4 libraries on RDNA 4 to the officially supported FP8 libraries, and the performance difference between FSR 3.1 and FSR 4 is almost identical, as well.
Sources: Computerbase.de, u/NaM_777 on Reddit
Add your own comment

30 Comments on FSR 4 on Older Radeon GPUs Tested: Improves Image Quality With Minor Performance Hit

#1
Leiesoldat
lazy gamer & woodworker
Are there results for the RX6000 series GPUs (RDNA2)? The graphics just show results between RDNA4 and RDNA3 cards.
Posted on Reply
#2
TheGeekn°72
LeiesoldatAre there results for the RX6000 series GPUs (RDNA2)? The graphics just show results between RDNA4 and RDNA3 cards.
third pic is a 6950XT
Posted on Reply
#3
Fatloader
Why is this in the trending list with only 2 (3 now) comments???
Posted on Reply
#4
Lianna
This looks really good. The questions are:

1. When may it be officially suported on RDNA2 and RDNA 3.0 / RDNA 3.5?
AMD, take a hint, give us a choice; FSR4 does not have to be the default (why, though?), let us flip the switch.

2. What is the performance impact of FSR4 on Radeon 780M on Phoenix / Hawk Point (7840/8840/Z1E etc., RDNA 3.0) or on Radeon 890M on Strix Point (HX370/Z2E etc., RDNA 3.5)?
FSR4 would be really helpful there and they have good compute in relation to bandwidth. Both 7900XTX and 6950XT have 4-7 times the compute power, though.

3. What is the performance impact of FSR4 on Radeon 8060S/8050S on Strix Halo (390/395 MAX etc., RDNA 3.5)?
As above, but even more compute in both relative and absolute sense than 780M / 890M.

4. Could FSR4 be done on NPU?
It would not help on Z1/Z1E/Z2/Z2E etc. (no FPU), but 7840/8840 parts have 10/16 TOPS NPU and HX370 and 395 MAX have larger/newer NPU, maybe that would free some processing power in the GPU.
Posted on Reply
#5
Event Horizon
It's sad that we learn about this from insiders and dll leaks instead of official statements and roadmaps. How about some transparency?
Posted on Reply
#6
TheMailMan78
Big Member
Event HorizonIt's sad that we learn about this from insiders and dll leaks instead of official statements and roadmaps. How about some transparency?
why buy the cow when the milk is free is my best guess.
Posted on Reply
#7
ToTTenTranz
I wish someone made more thorough benchmarks between quality settings. It looks like RDNA2 users are always better off using DP4a XeSS instead of INT8 FSR4, but for RDNA3 with the INT8 WMMA version the results might be very different.

Though I guess all that work could be deemed worthless if/once AMD releases an official and better optimized INT8 FSR4 version for RDNA3.
Lianna1. When may it be officially suported on RDNA2 and RDNA 3.0 / RDNA 3.5?
I don't think it'll ever be officially supported on RDNA2, to be honest. Just use either FSR3.1 or XeSS DP4a on RDNA2.
Lianna2. What is the performance impact of FSR4 on Radeon 780M on Phoenix / Hawk Point (7840/8840/Z1E etc., RDNA 3.0) or on Radeon 890M on Strix Point (HX370/Z2E etc., RDNA 3.5)?
The INT8 version (good for RDNA3, lower quality than FP8) on Quality mode is taking ~3.3ms for 720p output to 6.6m for 1080p output on the 780M:


If this isn't bandwidth-limited, I'm guessing it'll be around 15-30% faster on the 890M (2.5-4.6ms).
Lianna3. What is the performance impact of FSR4 on Radeon 8060S/8050S on Strix Halo (390/395 MAX etc., RDNA 3.5)?
Probably half to a third of the compute time you see on the 890M.
Lianna4. Could FSR4 be done on NPU?
Most probably not. The NPU can't access the GPU caches in the Strix and Phoenix SoCs, so any data coherency must go through the RAM which would probably add a ton of latency while reducing effective bandwidth for the iGPU.
The only thing the NPU can do is a spatial upscaler which is what Microsoft implemented on the Windows Qualcomm machines and is bound to implement on the Xbox Ally X because it also has the NPU active. The result doesn't seem to be all that much better than FSR1 / RSR, though.
Posted on Reply
#8
RejZoR
Hey, if they can get it to work on older generations with minor performance, that's great. FSR4 looks AMAZING compared to any older FSR and in the end you're still gaining performance. Especially with latest Radeon driver 25.9.2 which allows overriding FSR4 into any game that already supports FSR 3.1 without AMD having to whitelist it.
Posted on Reply
#9
adilazimdegilx
Well, I already have a topic here but to sum it up, this is basically what AMD is going to give everyone over FSR3 in next. It is just leaked early.
- It works with RDNA2 and RDNA3, in my testing it does NOT perform worse on RDNA2 (compared to ppls results on RDNA3).
- It is a heavier algorithm than FSR3. You get about 10% less FPS compared to what you get with FSR3 eg. If FSR3 Quality gives you 30% uplift, you get 20% with this.
- It looks drastically better than FSR3. Especially on some games where FSR implementation is sh-t (like CP2077) it is night and day.
- Even 1440p FSR4 Performance is quite acceptable in my tested games (CP2077, DL: The Beast, Satisfactory, Horizon FW). So even though it performs worse, you can easily use more aggressive upscaling to make up for it and I can comfortably say it still looks similar if not better than something like FSR3 Quality.
- It can be used with newest driver IF you swap some .dll files from 23.9.1 driver (there are videos on youtube for files). I'm currently running it on 25.9.2.
Posted on Reply
#10
RejZoR
I wish Blizzard would move their stupid lazy ass and replace ancient FSR 2.2 with FSR 3.1 so I can just force FSR4 through drivers. Wishful thinking I guess...
Posted on Reply
#11
Lianna
Lianna2. What is the performance impact of FSR4 on Radeon 780M on Phoenix / Hawk Point (7840/8840/Z1E etc., RDNA 3.0) or on Radeon 890M on Strix Point (HX370/Z2E etc., RDNA 3.5)?
FSR4 would be really helpful there and they have good compute in relation to bandwidth. Both 7900XTX and 6950XT have 4-7 times the compute power, though.
ToTTenTranzThe INT8 version (good for RDNA3, lower quality than FP8) on Quality mode is taking ~3.3ms for 720p output to 6.6m for 1080p output on the 780M:
I'm grateful for any useful data, so thank you for info on latency impact.
From the video you linked the fps seems to dip only slightly between FSR versions. It seems awfully optimistic considering previously reported compute requirements increase between FSR versions.
I'd guess INT8 FSR4 as shown looks like "general" version of XeSS, so compatible with more systems and more performant but lower quality than original FP8 FSR4.
Lianna4. Could FSR4 be done on NPU?
It would not help on Z1/Z1E/Z2/Z2E etc. (no FPU), but 7840/8840 parts have 10/16 TOPS NPU and HX370 and 395 MAX have larger/newer NPU, maybe that would free some processing power in the GPU.
ToTTenTranzMost probably not. The NPU can't access the GPU caches in the Strix and Phoenix SoCs, so any data coherency must go through the RAM which would probably add a ton of latency while reducing effective bandwidth for the iGPU.
I would not be so sure. While Strix Point and Phoenix / Hawk Point would have to create separate data buffers, probably in RAM, Strix Halo's GPU works through 32 MB MALL cache. I remember reading that MALL cache is currently dedicated to the GPU, but this may change if needed - so in this case, it would not rule out NPU at least accessing the data that GPU left for it to process.
All NPUs have their own data buffers though, so maybe it's possible anyway.

Obviously, this means much more work to implement it with NPU, making it even less probable than RDNA 3.x FSR4 versions made by AMD; PC/Xbox handhelds may tip the scale, and as most of them don't have NPUs, it's FSR4 INT8 (or similar) that I'd hope for in the future.
Posted on Reply
#12
TheMailMan78
Big Member
RejZoRHey, if they can get it to work on older generations with minor performance, that's great. FSR4 looks AMAZING compared to any older FSR and in the end you're still gaining performance. Especially with latest Radeon driver 25.9.2 which allows overriding FSR4 into any game that already supports FSR 3.1 without AMD having to whitelist it.
Why buy a 9000 series card then? I think AMD will wait honestly.
Posted on Reply
#13
SKD007
Ah so ps5 pro will get it for sure. Hope GTA 6 supports it.
Posted on Reply
#14
Punkenjoy
At this point, it's pretty clear that AMD do not release it on older GPU to force people buying newer RDNA 4 GPU. (Or it could be also to not lose to performance comparison when upscaling is used).

But if that was available on Strix Halo and it would be a little bit cheaper (perhaps a full GPU + 1 CCD only), it would make incredible steam machine.

I think AMD have an opportunities to get better mindshare here but knowing them, i bet they won't take it.
Posted on Reply
#15
chrcoluk
Good news for steam deck then rdna2 working on Linux.

FSR3 isnt very good, going to 4 is easily worth that slight loss of performance.
Posted on Reply
#16
Vayra86
TheMailMan78why buy the cow when the milk is free is my best guess.
The cow ain't free; the 9070XT is far cheaper than RDNA3 so effectively already nuked RDNA3 value for us. I don't get it at all. AMD should have done this at launch of FSR4 themselves. Its clearly not hard.

Now its still a non advertised feature. Stupid idiots, they just don't want to win do they?
TheMailMan78Why buy a 9000 series card then? I think AMD will wait honestly.
The 10% uplift isn't exactly going to make or break any gaming use case. If you already have RDNA3 7900GRE or above, why would you upgrade to begin with?

And if you have RDNA2, moving to a 9070XT is full of advantages.
PunkenjoyAt this point, it's pretty clear that AMD do not release it on older GPU to force people buying newer RDNA 4 GPU
Yep... and with that AMD broke a promise that set them apart from Nvidia, nuking their brand image into the ground further.

After all, it was AMD that prior to FSR4 always said they wanted to offer the featureset to all cards that 'could'. So now that they FINALLY, after three whopping gens have a decent upscaler, they artifically segment it :D Penny wise, pound foolish... as if the customers funding RDNA1-3 didn't already suffer three fucked up upscalers and paid for them.

AMD does this every time. Similar things occur with pricing. Its like every time they release a new GPU they get arrogant for five minutes and make an offer everyone can easily refuse. Even the 9070XT had its pricing / partner communication oopsie alongside a last minute postponed launch... in a critical moment. Epic facepalms are not enough here.
Posted on Reply
#17
Luminescent
I understand why they didn't make it public, the performance hit is to high and would change what they perceive is an equivalent for let's say a 7800 xt or 7900 xtx.
Let's say AMD thinks 7800 xt is equal to 4070 super, with fsr3 they trade blows, with fsr4, 7800 xt is dead.
Posted on Reply
#18
DaemonForce
PunkenjoyAt this point, it's pretty clear that AMD do not release it on older GPU to force people buying newer RDNA 4 GPU.
There seems to be a division in calculators between RDNA 3 and 4.
No idea if the older generation really performs marginally better but the RX9070XT made me disinterested in the RX7900XT.
Personally I'm more invested in the creator features. Does this make me a candidate for buying into RTX5000 series? Maybe.
For the longest time I haven't been a fan of team green and I'm just not ready to dive into that rabbit hole.
Posted on Reply
#19
Zyll Goliat
Daniel Owen did some testing on RX 6800XT and results are really promising.....

Posted on Reply
#20
Denver
It’s impressive that AMD pulled it off. I suspect FSR 4’s INT8 may be slightly inferior in quality to FP8 version. But it's still a feat that silences the masses who doubted it was possible.
Posted on Reply
#21
dir_d
I am pretty sure AMD will release the Int8 version but is prioritizing the PS5 Pro. After that, im sure FSR INT8 will be released and run on every vendor like ever other version of FSR.
Posted on Reply
#22
RejZoR
TheMailMan78Why buy a 9000 series card then? I think AMD will wait honestly.
Because FSR still performs better, because ray tracing is dramatically faster, because it's a really good card. AFMF might also benefit from "Ai" features only available on RX 9000 cards. I don't know. If you don't care about any of it then sure, RX 7000 was pretty good for the most part outside of ray tracing.
Posted on Reply
#23
shuffy_losys
AMD doing what they're doing is the reason why people say their GPUs age like fine wine. Even though what they're doing technically benefits everyone.
Posted on Reply
#24
medi01
When even 7900XTX barely benefits from it... it gets obvious why AMD isn't releasing it.
Posted on Reply
#25
Hilux SSRG
medi01When even 7900XTX barely benefits from it... it gets obvious why AMD isn't releasing it.
You don't even know what you're talking about and own a 3050...

Check Daniel Owen's recent RDNA2 & RDNA3 FSR4 videos, the 7900 XTX gets about 30% increase in frames with better quality mode comparable to DLSS. If you think that's "barely a benefit" then enjoy your RT "missing" 3050.
Posted on Reply
Add your own comment
Nov 19th, 2026 06:44 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts