Monday, September 22nd 2025

FSR 4 on Older Radeon GPUs Tested: Improves Image Quality With Minor Performance Hit

After AMD recently leaked its own FSR 4 libraries on its GPUOpen GitHub repo, replete with libraries that support older hardware, it was only a matter of time before enterprising modders started demonstrating how those libraries could be used to port FSR to older RDNA GPUs. An enterprising Reddit user and modder recently posted a how-to guide explaining how to get FSR 4 implemented in games on RDNA 2 GPUs, and the results reveal improved image quality at the cost of performance. There are other caveats, as well, like having to use a very outdated driver or dive deep into configuration files to rename DLL files to get the upscaler working.

According to both the results posted in the Reddit thread and testing done by Computerbase, FSR 4 seems to offer a balance between native image quality and FSR 3.1 performance on both RDNA 3 and RDNA 2 hardware. Computerbase tested Cyberpunk 2077 in 4K on the Ultra settings preset using the AMD Radeon RX 7900 XTX, and FSR 4 delivered 11% faster performance than native, but fell short of FSR 3.1 frame rates by 16%. The Reddit user who posted the how-to guide tested an AMD RX6950 XT across a range of FSR 4 quality presets, and found that even when set to "Quality," the RDNA 2 GPU gained around 10% performance compared to native rendering in The Last of Us Part 2 at 1440p. Both sources comment that the image quality is a noticeable improvement over FSR 3, and it was more stable than XeSS, which, to its credit, beat out FSR 4 on RDNA 2 in The Last of Us Part 2 by up to 10%, depending on the quality preset. Curiously, similar performance deltas were observed when comparing the unofficial INT8 FSR 4 libraries on RDNA 4 to the officially supported FP8 libraries, and the performance difference between FSR 3.1 and FSR 4 is almost identical, as well.
Sources: Computerbase.de, u/NaM_777 on Reddit
Add your own comment

30 Comments on FSR 4 on Older Radeon GPUs Tested: Improves Image Quality With Minor Performance Hit

#26
fb020997
I’ve tried via Optiscaler on my 7900XT via optiscaler on the only two games I’m playing that support upscalers: HZD remastered and Atomic Heart. I play a couple of years old games (thanks to a huge backlog) at 1440p120, everything maxed out, and my GPU sometimes struggles keeping 120fps all the times.

On HZDr (in which FSR is a dll), FSR3.1.5 quality is already great, better than TAA. FSR4 is maybe a teeeeeeeeeny tiny bit better on some fine details but maybe it’s placebo. In the benchmark I lose exactly 22 fps (from 169 to 147). Not worth it, even if I play at 120fps.

On Atomic Heart though, it’s very good. Stock TAA it’s awful, especially once moving, it’s a blurry mess. Tweaked TAA is great standing still, but moving it’s still blurry. FSR2 quality isn’t great on details, but it’s sharp(er).
FSR3.1.5 via optiscaler is already a decent step up on details, but, since it’s unofficial, some water transparencies are sparkling and flickering.
FSR4 is a HUGE step up on details/sharpness, and I can’t even distinguish it on texture details from tweaked TAA, and it’s GREAT when moving, even on fast paced scenes, but there’s more of the same sparkling and flickering of the 3.1.5. It’s awesome for reducing FPS fluctuations, even if some scenes (waay less than tweaked TAA) still run at 100fps instead of the usual 120.
Posted on Reply
#27
medi01
Hilux SSRGYou don't even know what you're talking about and own a 3050...

Check Daniel Owen's recent RDNA2 & RDNA3 FSR4 videos, the 7900 XTX gets about 30% increase in frames with better quality mode comparable to DLSS. If you think that's "barely a benefit" then enjoy your RT "missing" 3050.
I've grabbed ASUS G15 AMD Advantage Edition, don't worry about me.
Posted on Reply
#28
Hilux SSRG
medi01I've grabbed ASUS G15 AMD Advantage Edition, don't worry about me.
Did you find the 20% increase on your RX 6800M yet with FSR4 using Optiscaler? It's there, just watch Ancient Gameplays recent video if you can't find Daniel Owen's video...

If you're still having trouble finding the videos here you go bud, free 20%:

Once you are ready to admit wrong, report back son!
Posted on Reply
#29
medi01
Hilux SSRGDid you find the 20% increase on your RX 6800M yet with FSR4 using Optiscaler?
Means, drop a res, enjoy glorified upscaling at a bit higher frequency?
I'm probably too old for this. Thanks for the link though.
Posted on Reply
#30
evolucion8
medi01Means, drop a res, enjoy glorified upscaling at a bit higher frequency?
I'm probably too old for this. Thanks for the link though.
I have an Alienware M17 R5 AMD Advantage which has the same GPU as yours except is clocked slightly higher and uses 18GBps VRAM instead of 16GBps VRAM and gotta admit, using FSR4 brought me around 12-36% higher performance and better quality than using native on Hellblade with Optiscaler. Regarding Last of Us Part 1 and 2, the gains weren't as massive but showed around 12-22% gains while showing better grass details and stability compared to native with TAA and didn't required Optiscaler. Just did a backup of the fx dll file and replaced it with the INT8 version out of it and automatically exposed the FSR 4.0.2 version on my RX 6850M XT.
Posted on Reply
Add your own comment
Nov 19th, 2026 06:36 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts