Wednesday, September 3rd 2025
AMD "Zen 6" Processors to Use TSMC 2 nm Node for CCDs, 3 nm for IOD
AMD will transition its next-generation "Zen 6" desktop Ryzen and server EPYC processors to a split-node strategy, placing CPU core complex die (CCD) on TSMC N2P 2 nm node variant and building the I/O die (IOD) on the N3P 3 nm node. At TSMC, volume ramp for the 2 nm node is around the third quarter of 2026, opening the door for limited shipments as early as late Q3 or broader availability in Q4 2026. Under the split approach, the compute chiplet will house the Zen 6 cores and a substantially larger shared L3 pool, while the IOD will continue to host memory controllers, PCIe lanes, USB, and the integrated GPU. Earlier rumors suggest that each CCD could contain 12 Zen 6 cores with support for SMT, and a shared L3 cache that may increase to roughly 48 MB per CCD compared with prior generations. Typical consumer configurations would pair up to two CCDs with a single IOD, creating chips with up to 24 cores and 48 threads, while server variants could scale further depending on packaging.
Performance expectations center on achieving double-digit IPC gains, higher sustained clock speeds, and improved power efficiency, thanks to the advanced process nodes. The choice of N3P for IOD helps AMD cut some costs for non-core logic, while the N2P compute die aims to extract greater generational gains. However, as with any new TSMC node, it will carry a premium over the N3P, so using it only for the compute side is the most viable choice. Platform compatibility remains for one more generation, with Zen 6 expected to support the existing AM5 socket. Users can upgrade CPUs without a full platform replacement. If the ramp timing holds, Zen 6 will arrive into a crowded second half of 2026 desktop window. For datacenter applications, the EPYC "Venice" generation, based on Zen 6, will utilize sIOD (server I/O die), implementing PCIe Gen 6, which provides a generational doubling in bandwidth to GPUs, SSDs, and NICs. AMD is also claiming memory bandwidth of up to 1.6 TB/s for these CPUs, so we could see some of that trickling down into consumer configurations.
Source:
Kepler_L2
Performance expectations center on achieving double-digit IPC gains, higher sustained clock speeds, and improved power efficiency, thanks to the advanced process nodes. The choice of N3P for IOD helps AMD cut some costs for non-core logic, while the N2P compute die aims to extract greater generational gains. However, as with any new TSMC node, it will carry a premium over the N3P, so using it only for the compute side is the most viable choice. Platform compatibility remains for one more generation, with Zen 6 expected to support the existing AM5 socket. Users can upgrade CPUs without a full platform replacement. If the ramp timing holds, Zen 6 will arrive into a crowded second half of 2026 desktop window. For datacenter applications, the EPYC "Venice" generation, based on Zen 6, will utilize sIOD (server I/O die), implementing PCIe Gen 6, which provides a generational doubling in bandwidth to GPUs, SSDs, and NICs. AMD is also claiming memory bandwidth of up to 1.6 TB/s for these CPUs, so we could see some of that trickling down into consumer configurations.

71 Comments on AMD "Zen 6" Processors to Use TSMC 2 nm Node for CCDs, 3 nm for IOD
Here's hoping they'll also use the new interconnects from strix halo, which use a lot less power.
If you compare the die shots/layout, chiplet/IO die haven't really changed in placement since Zen 2-5, so a closer to monolithic style arrangement with Z6 should be quite significant in implication, and about time.
Waiting for AM6.
We did not learn anything fundamentally new today that we did not already know in March from Tom.
The MC has been fine for two-bank modules since years. With new CPU generation DDR5 6400 is quite normally reachable (with 1:1 ratio! Where intel sometimes needs 1:2 already). Yes AMD is more memory sensitive but it has been of a lesser impact with the 3D Cache versions lately.
Where they are still stuggling is a full 4 2-sided Module area, e.g. with my 4x32GB Modules I am reaching now 5600 with tuned timings and 1:1 ratio tops.... Some are reaching 6000 but it is a memory/mobo/cpu lottery atm.
This should improve with the new IO-Die. Of course 2-bank scenarios would also improve too, but they are not of a problem atm.
The slide above shows the initially advertised improvements from N5 to N3, but in reality, SRAM density only increased by 5%. We don't know if analog structures improved by the stated figure, but given the miss for SRAM, it's likely that they didn't.
It still stings, that horsesh1t play from 2020 and 21 when ODMs and AMD tried so hard to explain how Zen3 is not compatible with 300-series chipset boards. But then, by pure magic, 19 months later, it was possible. Yay! BIOS chip has small capacity for new AGESA codes. Yea right.
Until the launch day, I will take this info with a truck of salt.
Makes me want to downgrade from my 4585PX and just hold off for Zen 6. I'm dying trying to stabilize 8400MT/s with this one, but 10,000MT/s should be a piece of cake for that IMC.
Bring it on.
www.tomshardware.com/pc-components/cpus/we-tested-intels-unreleased-200s-boost-feature-7-percent-higher-gaming-performance-thanks-to-memory-overclocking-now-covered-by-the-warranty
Phoronix found 6% uplift in a comprehensive re-test in Linux 400 benchmarks back in April, before he tested the Boost feature a few days later. The uplift came mostly from new BIOS optimizations and polishing drivers.
www.phoronix.com/review/intel-arrow-lake-ubuntu-2504/10
When the Boost feature was introduced, he re-retested it again in ~70 workloads including games, and found, in his words, "the performance benefits of the 200S Boost mode were very muted"
www.phoronix.com/review/intel-200s-boost-linux/6
Let's not romanticize Intel Boost. Elephants don't fly.No worries. AMD is not in a hurry to make money from you. They will make money from tens of millions of other buyers.Don't forget that they use IOD for two generations at least. One IOD served Zen2/3, another one Zen4/5, and the new one will most likely serve Zen6/7, so they need to have ~4 years of IOD longevity. It looks like N3 is universal for all client IODs, including mobile. Another reason is power efficiency. Yet another reason is introduction of new Infinity Fabric that is projected to use fan-out, dense design.That's not going to happen. There would be a huge backlash against AMD. They would lose the momentum and community trust. I would immediately switch back to Intel if that happens. The worst case scenario is that 900 series boards will simply have all new features, which is to be expected, such as faster memory, a few extra PCIe lanes, integrated USB4 or similar.Exactly. They must have learnt that lesson. Current BIOS chips are fine.
Very small at the endSpeculation: Somewhere and somehow there will be sometimes in the future another AM5 processor. It may work with current AM5 mainboards. Therefore you will not need to buy another motherboard. If the better process node will increase performance we will see. ....
Are there any facts in the topic?There are no facts.
When a future processor has the same socket & you have firmware which supports your processor it will work.
The firmware is the uefi, sometimes named bios, update of your mainboard which also includes the agesa version for your processor and other stuff.
It's best to look out for the AGESA version.
two spreadsheets to keep around as a amd motherboard user
docs.google.com/spreadsheets/d/12zg6yT_H7H-W1voyw1ZoIrj0GSE7WI4Ug-uLlv-Asa8/edit?gid=858530609#gid=858530609
docs.google.com/spreadsheets/d/1NQHkDEcgDPm34Mns3C93K6SJoBnua-x9O-y_6hv8sPs/edit?gid=446857487#gid=446857487
I changed to MSI mainboard with same CPU, DRAM, NVME, gnu linux, w11 pro. Just by testing another cpu tower cooler, another thermal paste and another mainboard I get much better DRAM clocks. Some mainboards are just crapware. I tested the same AGESA version on both the ASUS and MSI mainboard. MSI is far better when you are able to put in the numbers by hand. Stock values are worse for both mainboards.