Wednesday, July 15th 2026

Cervoz Introduces the T445 and T455 Industrial M.2 2230 A+E Key NVMe SSDs

Compact embedded systems are becoming smaller, while storage requirements continue to grow. Applications such as embedded computing, medical computers, self-service kiosks, and service robots need reliable local storage for operating systems, data, logs, updates, and system files.

However, when system space is limited, adding storage is often not as simple as installing another SSD. Designers may face limited PCB space, low-profile enclosures, and a lack of available M-Key storage slots.
When Your Space and Interfaces Are Limited
M.2 A+E Key slots are often used for Wi-Fi, Bluetooth or other PCIe-based expansion modules. In some embedded system designs, A+E Key slot may be unused or available for alternative configuration. For applications that require additional storage but cannot accommodate larger SSDs, the M.2 2230 A+E Key form factor provides a practical way to increase storage capacity within a limited footprint. By utilizing an available A+E Key slot, system designers can expand local storage without increasing system size.

M.2 2230 A+E Key: Compact Size, More Storage
The Cervoz T445 and T455 M.2 2230 A+E Key SSDs are designed to deliver PCIe Gen4x2 NVMe storage in an ultra-compact form factor. The series provides high-speed storage expansion for space-constrained embedded and industrial applications.

Both the T445 and T455 adopt 3D TLC NAND flash and support the PCIe Gen4x2 interface, delivering sequential read speeds of up to 1,865 MB/s and write speeds of 1,740 MB/s. With the compact M.2 2230 A+E Key design, the series helps system designers make better use of available board interfaces while maintaining a small system layout.

Key advantages of the T445/T455 series include:
  • M.2 2230 A+E Key form factor for compact system layouts
  • PCIe Gen4x2 NVMe performance for faster data access
  • Capacity of T445 up to 1 TB and T455 up to 960 GB (with Over-provisioning)
  • Standard temperature and wide temperature support
  • End-to-End Data Protection for data integrity
  • Optional Write Protect function for enhanced data security
  • Industrial-grade technologies for long-term embedded deployment
The T445 and T455 M.2 2230 A+E Key SSDs are ideal for applications where system size, thermal design, and interface availability are critical considerations.
  • In embedded computing, they can be used in compact IPCs, fanless systems, and low-profile platforms. In medical computers, they support storage needs for bedside terminals, nursing stations, and treatment center systems.
  • In self-service kiosks, they provide local storage for operating systems, applications, transaction logs, and media assets.
  • In service robots, they can support system boot, local data logging, AI model storage, and operation records.
  • In medical computers, compact size and reliable storage are essential. They support storage needs for bedside terminals, nursing stations, and treatment center systems.
As embedded systems continue to become smaller and more integrated, storage expansion must balance capacity, performance, reliability, and space efficiency. The Cervoz T445 and T455 M.2 2230 A+E Key SSDs provide a compact PCIe Gen4x2 NVMe storage option for applications where every millimeter matters.
Source: Cervoz
Add your own comment

7 Comments on Cervoz Introduces the T445 and T455 Industrial M.2 2230 A+E Key NVMe SSDs

#1
Philaphlous
Considering my NVME ADATA SSD is sitting inside my baking Tesla when its 101F outside..."industrial" would be very much welcome for consumers...
Posted on Reply
#2
azrael
What's the difference between the two, beside the obvious discrepancy in size...
Posted on Reply
#3
0xE1
Vast majority if not all A+E slota are just a single PCIe lane, not always highest gen either, and at worst it has only USB, so while nice to have option, it's at speeds comparable to first gen nvme ssds
Posted on Reply
#5
Evrsr
azraelWhat's the difference between the two, beside the obvious discrepancy in size...
T455 seems to have over provisioning (less storage) for better endurance.
Posted on Reply
#6
Let3r
PhilaphlousConsidering my NVME ADATA SSD is sitting inside my baking Tesla when its 101F outside..."industrial" would be very much welcome for consumers...
Why is it sitting in your car though?
Posted on Reply
#7
LabRat 891
I'd consider running an external USB WiFi/BT radio just to get NVMe on older boards/laptops.
Integrating the NVMe DXE driver shouldn't be too hard, and there's always bootloader stacking, too.

Shockingly, even over Gen1.1x1, an NVMe is a big upgrade over SATA.
-I'll never forget running Win7x64 off a P1600X Optane on a dual Socket 940 Opteron build.
Posted on Reply
Nov 20th, 2026 10:08 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts