Wednesday, June 3rd 2026

Cryorig Updates High-Performance Cooling Hardware and Launches PC Case with 13 HDD Bays at Computex 2026

While Cryorig debuted a very interesting semi-passively cooled PC case at Computex 2026, the company also featured its fresh line-up of active cooling hardware, including the new H6 CPU cooler, a sizeable E-ATX PC case designed for workstation and AI use, and its recently updated Cryo360 AIO liquid cooler. The H6 CPU cooler is the latest in Cryorig's line of budget CPU air coolers that would compete in the same market as the Cooler Master Hyper 212 series. The H6 has a pure copper base with six heat 6 mm pipes and a total footprint of 122 × 69 × 148 mm, meaning it should have wide case compatibility, thanks to the low total height.

The H6 is compatible with Intel sockets going back to LGA 115X (meaning LGA 115X, 1200, 1366, 1700, and 1851, while AMD is limited to AM4 and AM5. Cryorig clams that the new cooler operate as quietly as 31.5 dBA. Cryorig also showed off its dual-tower Gladius Astral CPU air cooler, which has a small display on the top for system metrics, and its Cryo360 CPU liquid cooler, which, as the name suggests, is a 360 mm AIO cooler with a ceramic shaft core water block and a round display on the top of it. The Cryo360 has a 27 mm thick radiator and ships with three PWM fans capable of delivering 61.24 CFM airflow at 900-2,000 RPM, with noise performance claims of as little as 32.2 dBA.
In addition to the CPU cooling hardware, Cryorig also revealed the AI-100 high-performance PC case that appears to be oriented towards high-end workstation or server use-cases. The AI-100 measures 526 × 245 × 545 mm and supports up to E-ATX motherboards, GPUs up to 445 mm long, CPU coolers up to 185 mm tall, and PSUs up to 175 mm long. Internally, there are 16 bays for 3.5-inch (or 2.5-inch) drives, mounting points for 13 fans, and 10 PCIe expansion slots. The case also supports up to a 480 mm radiator in the top position or a 360 mm radiator in the front position. The AI-100 case's performance intentions are also telegraphed by its apparent performance focus. All the fan mounts are behind open grilles for maximum airflow, and the case has plenty of exhaust space where fans cannot be installed, which would make it a good contender for a positive pressure setup. The AI-100 case also has a vertical support pillar mounted in front of the right side panel, opposite the motherboard, where it has three GPU support brackets installed to prevent sag. The front panel I/O on the AI-100 consists of dual USB 3.0 Type-C ports, a single USB Type-C 3.2 Gen 2 port, and a 3.5 mm audio jack.
Add your own comment

7 Comments on Cryorig Updates High-Performance Cooling Hardware and Launches PC Case with 13 HDD Bays at Computex 2026

#1
Athena
Cpt.JankThe H6 is compatible with Intel sockets going back to LGA 115X (meaning LGA 115X, 1200, 1366, 1700, and 1851, while AMD is limited to AM4 and AM4.
small typo, show be AM4 and AM5
Posted on Reply
#2
wheresmycar
Thats a surprise. Where on earth has Cryorig been hiding all these years? The old H7s were absolute bargains for around £35. I managed a few, even got my hands on a R1 Ultimate (or universal).

Nice to see Cryorig back in the game, although the competition is a good bit fiercer now than it was back in the H7/R1 days. Or were they already in the game but completely off our UK radar?
Posted on Reply
#3
Toothless
Tech, Games, and TPU!
Only 13? I see space for at LEAST another two. Thems rookie numbers.
Posted on Reply
#4
Chaitanya
Around mid to late 2000s was the last time we had full copper heatsinks and slowly industry moved to lighter and cheaper aluminium heatsinks. That full copper single tower looks nice but it will heavy and far too expensive for its class and wont perform any better than competition.
Posted on Reply
#5
cyneater
Years ago have cyroorig a go over NOCTUA

after I couldn't find or obtain a am4 kit for my Cryorig R1 Ultimate never again and never recomend them to anyone...

so just get NOCTUA
Posted on Reply
#6
EsaT
ChaitanyaAround mid to late 2000s was the last time we had full copper heatsinks and slowly industry moved to lighter and cheaper aluminium heatsinks. That full copper single tower looks nice but it will heavy and far too expensive for its class and wont perform any better than competition.
Copper base is standard thing for any but the absolutely lowest end coolers.
Posted on Reply
#7
Chaitanya
EsaTCopper base is standard thing for any but the absolutely lowest end coolers.
2nd picture of H6 shows full copper heatsink version. Not talking about Copper base.
Posted on Reply
Nov 17th, 2026 14:06 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts