Saturday, September 26th 2026

PNY Reportedly Denies Melted RTX 5090 Warranty Claim, Says Native PSU Cables Not Covered

PNY has allegedly denied a warranty claim on a burned-out GeForce RTX 5090 and closed the customer's ticket after he asked which part of the warranty it was citing. Redditor u/Melodic_Initial_1767 says his card died last month after both ends of its 12V-2x6 cable melted, on the GPU side and the power supply side. He says the card ran at stock clocks with no overclock, a power limit set below default, and was idle when it failed. The cable he was using was not a cheap third-party adapter; it came bundled with his ASRock PG-1600G power supply.

According to the Redditor, PNY's denial stated that only a PNY-approved cable or adapter is covered, and that damage from a third-party cable, adapter, or PSU cable falls on that maker instead. He says he checked PNY's warranty document and installation guide and found no mention of approved cables, connectors, or the 12V-2x6 standard in either. When he asked twice which clause backed the denial, a "Senior Technician" reportedly said the decision was final and closed the ticket without answering.
Melting 12V-2x6 connectors have shown up on RTX 5090 cards repeatedly since launch, and independent testing has traced some cases to uneven current distribution across the connector's pins rather than any specific cable brand. Separately, NVIDIA has also faced criticism this month over an RTX 5090 claim it rejected over a faded serial number, so this isn't the only RMA dispute around the card. PNY hasn't issued a public statement yet, and the account so far rests on the customer's word, so it should be taken with a grain of salt.
Source: Reddit
Add your own comment

143 Comments on PNY Reportedly Denies Melted RTX 5090 Warranty Claim, Says Native PSU Cables Not Covered

#2
FR3D1
Ninja Cat
DrUsmanSaleemThe cable he was using was not a cheap third-party adapter;
DrUsmanSaleemit came bundled with his ASRock PG-1600G power supply.
ASRock means JUNK!

Ticket closed.
Posted on Reply
#3
Hecate91
ASrock doesn't make their own power supplies.
And this is a BS reason to deny warranty, all of these cables follow a set standard, but unsurprisingly companies are finding any excuse to get out of warranty replacement when they can sell cards to AI companies instead.
Posted on Reply
#4
csendesmark
Disgusting! :slap:
Just bring it to small claims... :nutkick:
Posted on Reply
#5
SnoutBaron
This is the warranty card for my PNY 5070 which is the same for the 5090 too. Applies to all PNY GTX 16, RTX 30/40/50 series.

www.pny.com/file%20library/company/support/product%20brochures/geforce%20graphics/warranties%20and%20policies/3-year-limited-warranty.pdf

Catbox backup:
files.catbox.moe/zqa6bg.pdf

No mention of anything like this at all:
that only a PNY-approved cable or adapter is covered, and that damage from a third-party cable, adapter, or PSU cable falls on that maker instead.
Posted on Reply
#6
KrazedOmega
PNY's denial stated that only a PNY-approved cable or adapter is covered, and that damage from a third-party cable, adapter, or PSU cable falls on that maker instead.
Uhh, aren't like 90% of users out there just going to use the cable that came with their PSU?

This rejection doesn't make sense at all.
Posted on Reply
#7
Frick
Fishfaced Nincompoop
KrazedOmegaUhh, aren't like 90% of users out there just going to use the cable that came with their PSU?

This rejection doesn't make sense at all.
Especially considering the cable that comes with the card is a PCIe -> 12V-6x2 adapter cable.
Posted on Reply
#8
Hecate91
csendesmarkDisgusting! :slap:
Just bring it to small claims... :nutkick:
50 series owners need to get together and start a class action.
Posted on Reply
#9
ymdhis
All 5090 warranty claims are denied on account of no manufacturer having any spare stock, and the cards being worth 8-10x the initial price. Get used to it.
Posted on Reply
#10
dartuil
That asrock psu is from FSP not that junk.
Posted on Reply
#11
johnnypop
That is insane how they try to dodge the warranty claim on know failure, yet I love to see how der8auer and thermal grizzly responded to this, and I have to say I've never been let down by them, hopefully helping this user and bringing this company case more into the spotlight will be a good lesson for everyone.
Posted on Reply
#12
Krit
FR3D1ASRock means JUNK!
freeagentAssrock is junk, I would never spend money with them.
If psu was from Corsair/Be Quiet! would you guys farted the same way at them?
Posted on Reply
#13
john_
He says he checked PNY's warranty document and installation guide and found no mention of approved cables, connectors, or the 12V-2x6 standard in either.
PNY needs to cover this RMA.

Next time PNY needs to tell customers what cables, what PSUs, what motherboards, what case funs, what usb sticks, what SSDs, what PC cases, what tables and chairs are compatible with their graphics cards and more of this kind of BS, they should clearly state it in their warranty rules, so people know to avoid PNY products.
Posted on Reply
#14
john_
JustBenchingIt was idle when it happened. Sure bro
FR3D1ASRock means JUNK!

Ticket closed.
freeagentAssrock is junk, I would never spend money with them.
So, "user error" ?
Posted on Reply
#15
csendesmark
Hecate9150 series owners need to get together and start a class action.
That works too, but I would say follow the practices of Louis Rossmann, and you will be fine.
As he explained how Samsung tried to fuck him over with his 4TB 990 PRO SSD.
"Be annoying to them"
Posted on Reply
#16
john_
Question to Gemini AI
Are there PNY-approved 12VHPWR / 12V-2x6 power cables? Is there a list or a page that has a list?
AI reply

Posted on Reply
#17
Hecate91
john_So, "user error" ?
User error, they weren't wearing PNY approved pants that day, and didn't pray to the tech gods and Jensen for the cable to not melt.
Posted on Reply
#18
Mr. Perfect
Well shit, now I have to wonder what stunt PNY will try to pull if my 5080 needs RMA.

It's a shame EVGA isn't still in the market, they had top tier support back in the day.
Posted on Reply
#19
freeagent
KritIf psu was from Corsair/Be Quiet! would you guys farted the same way at them?
Corsair is junk to me too, have not owned be quiet.
Posted on Reply
#20
Krit
freeagentCorsair is junk to me too, have not owned be quiet.
HeHe they all are melting!
Posted on Reply
#21
freeagent
KritHeHe they all are melting!
Not mine.. yet. Been a few years.
Posted on Reply
#22
user556
Cut the plug off and solder direct ... the only way to be sure.
Posted on Reply
#23
Solaris17
Super Dainty Moderator
freeagentCorsair is junk to me too, have not owned be quiet.
Agree, I’m not a Corsair dude anymore. I only pretty much look at superflower, seasonic, be quiet, fsp

Not that it has anything to do with this topic though.
Posted on Reply
#24
FR3D1
Ninja Cat
@Krit
Various PCs shipped with FSP power supplies apparently suffer from the exact same problem. They are failing left and right! It’s strange, but that’s what I’ve observed. ASRock isn't even an established vendor in this regard. So, the comparison is flawed and significantly so.

Regards,
Fred.
Posted on Reply
#25
lexluthermiester
FR3D1ASRock means JUNK!

Ticket closed.
This is bullshit! WTF was that? ASRock is not the problem.
john_PNY needs to cover this RMA.
Yeah, they do.

@ PNY
What the hell is wrong with you people? A card you designed and built burned up and you're blaming the PSU maker? This is "Gigabyte" levels of low. Not a good showing, not good at all.
Posted on Reply
Add your own comment
Nov 15th, 2026 04:16 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts